marantz

Marantz just honored Value Electronics with the very selective authorization for the new Limited Edition Model 30 Integrated Amplifier and 30N SACD/Network Server! A music lovers dream amplifier with built-in phono EQ and MM and MC phono stage with the new selectable impedance selector with...

I purchased this AV receiver but the dimensions will not fit my stand. My mistake is your gain. Unit is brand new, unopened in box. Asking $1949. I would prefer local pickup in metro Atlanta area, but would ship if buyer pays actual cost.

Ok I'm about to pull my hair out on this. I have a Klipsch R-115SW subwoofer. It has been working for a year now but moved my system and now it magically doesn't work. Im using the WA-2 Wireless transmitter for it, shows them connected and everything. When i go into my Marantz setup and do the...

Hello. I own this Marantz which I purchased new in 2013 and have had very little trouble since then; however, that all changed a few days ago when I noticed that my left surround speaker (channel) had dropped way low in volume. So I ran the Audyssey program again, after doing a receiver...

Greetings All, I'm hooking up this AV receiver and would like to output audio to an amplified whole house stereo (Nuvo amp & tuner). I used the 2 Pre-Out Front RCA outputs for line out, but the volume coming out of the Nuvo speakers is very low. Can anyone reccomend which output I'm supposed to...

Hi I have a 2000 vintage Marantz SR 7000 receiver which was working fine till recently. About a year back, the remote control completely went bust. After that, I have been trying to use the system through the various buttons on the unit. However, I have noticed that the volume is not going below...

My Marantz 19 receiver has been a bit noisy and needs a facelifting. Does anyone knows where I could buy new tubes, pls?

I have a tv mounted over a fireplace that has component cables run with too costly of a drywall repair job at the moment to run hdmi and I am not getting any picture output. I have the component cables connected to the monitor/zone2 with the settings set to Main Zone. Does anyone have any...

Like a lot of people, I have a main HT in a dedicated room, but also have a second system that gets more regular use, in a more central part of the house. In the past, this system was kind of a hand-me-down one, sort of cobbled together with stuff that was replaced in the main system, or was...

I have a Marantz SR6010 and recently updated to an LG 4K HDR B8 OLED 77" with Dolby Vision. Anytime I am in Dolby Vision mode, say with my Apple TV 4K, the on screen display menus from the receiver will not display on the TV. If I switch the mode back to something different such as HDR10, the...

Hi there, I have marantz SR7005 that i bought brand new few years back. It was great all these years. From last few days I am experiencing occasional 3-5 seconds black out every 10 minutes or so. No audio or video for few seconds and it comes back. I've tried changingall hdmi cables, hard reset...

So I have an old Marantz SR 7300 that I am having problems with. Plugged in, I see a red standby button. However when turning the unit on, you get a click a couple seconds pause, and then the unit turns back off. No display on the front or any other lights, sounds, etc. Thinking it was the...

Hi All, I am a rookie person for Home Audio - Video Systems. I have purchased a Marantz NR1607 two year ago, and purt together with Canton Movie 85 CX 5.1 Speakers for my home theater system build. I was looking for a community to get in touch with other interested people with AVR systems for...

SOLD

I bought a Sony x900f 75" TV and hooked it up to my Marantz AV7704 via the x900f HDMI 3/ARC to the Monitor 1 ARC on the AV7704. Unfortunately I only get stereo when I send the signal from the TV to the Sound processor when viewing Netflix. I haven't tried too many other sources on the TV so I am...

I have had my 7704 for a year & a half. Using XLRs I have it hooked up to 2 Emotiva XPA-1s, 1 XPA2 and 1 XPA-3. I also have the amplifiers attached to the 12v trigger jacks so that everything turns on & off auto-magically. Everything was working swimmingly until I replaced the Xfinity X1 slave...

Hi everyone. I need help with an issue with my subwoofers. My home theater is based on Gallo speakers, I have strada in front and center, a'diva as surround and atmos speakers along with 2 Gallo TR-3 subwoofers. I'm using Marantz SR7013 as Receiver. Now that I live an house I've been able to...

Review Of The Marantz SR-8012 11 Channel Surround Receiver By Dave Moritz Date: November 2018 Posted: March 2019 A special thank you goes out to a good friend who was also my consultant through the entire reseach phase and made my purchase possible! Jon Gomes I have been I have been with...

Just spent the better part of two days trying to troubleshoot my "new" (to me) Marantz SR7011 receiver, The main problem is that I don't have any video out of the HDMI output ports,*(monitor 1,2,or3 (at least none are showing up on my LG smart TV) which does display my DVD movies without a...

New to the forum, hello everyone! I’ve always been an audiophile but pretty new to the home theatre scene. I’ve had a Marantz SR4023 driving a pair of Focal 726 for years and totally loved the setup. The receiver is 2 channel 80 watts/channel. Our new house doesn’t support 2 separate listening...

I'm still researching between Pioneer Elite (which is what I've had for the past 18 years), Marantz, and Anthem... But while looking at Marantz I realized I had a question. I'm at the cusp of being able to get in to separates, but being able to do it in a couple steps would be easier. What...

anyone know how to Delete , Erase or Overwrite RADIO presets from the memory of a Marantz AV-7005 ? I've searches the Outlaw manual and the 110 page Marantz manual , both address how to Rest the whole Processor and Not just a minor presets. I will "chat" with marantz except I thought the...

Hi. How are you? My old NAD amplifier died like 1 week ago. It was an old one with the DVD inside.. I am currently looking to replace it. I don't have a big budget but I am not looking for crappy receiver either... I have found a Marantz SR7200 in good shape for 150$ CAD. I will drive 5.1...

Hello! I’ve recently swapped out an Onkyo TX-NR1010 AVR in my 7.2 home theatre system to a Marantz SR7012. After hookup and calibration I’m hearing audible (and irritating) buzz through all 7 speakers. I went though the process of disconnecting inputs one by one to determine th source and I...

Hello. I own a Marantz SR7007 home theatre receiver and last night when I turned it on to watch a movie, it gave me a notification of a firmware upgrade, which I downloaded and installed, without knowing what the upgrade was. I thought it was a little unusual that I would receive a firmware...

Need to upgrade a Pioneer VSX-32 to something that can pass 4k. I am using external amplification so need pre outs for 7 channels. the front mains are bi-amped and I am actually running 5.1 speakers. Anyway, the Pioneer LX-503 has the preouts as do similarly priced models from Marantz SR5012...

Just finalized our 4 dedicated demo suites for the NY Audio Show. Here's what we're demoing in each room: Room 902: Sound United, which is Marantz and Definitive Technology with two systems being demo'd with one new surprise system. Room 903: All Technics with the flagship R1 Reference...

I need your kind support for making a decision. I compare between the following available models in my region&"according to budget as well" 1. Matantz NR1609 2. Marantz SR5012 3. DENON AVRX 2500H 4. YAMAHA Rx-V685 What i need is 7 channels , for living room 5*6 m " , want receiver that works...

First of all, its good to be back. I've been on HTF since 2004 or so as RickTop but have been out of the AV game for a while. For some reason, the site will not allow me to log on with my old user profile and I created a new account. Getting the bug again! I so appreciate all the help you...

Hello distinguished associates! I'm having a strange issue with my Marantz SR7007 receiver and that is the center channel volume level is suddenly greatly reduced, almost to the point where the dialog is hard to hear and I can't figure out why, other than perhaps that amp channel is going bad...