1. M

    Help with AVR Wall Mount Please

    I have this wall mount which I just mounted my tv to. I wanna get a wall mount for an AV receiver, however I seem to have a problem. If I get something that mounts to my tv wall mount like this, then if I tilt my tv forwards the AVR might fall off. Also if I move the tv around it may tug on...
  2. viduragarwal

    Advise on Zone 2 & 3 on Denon AVR

    Hello Friends, I have the following for the respective rooms - - Home Theatre Room: Denon AVR X4500H (11.2 channel + Zone2/3), Projector Screen, 11.2 Klipsch Speakers - Zone 2 Room: 4K TV, Stereo Speakers (2.0) - Zone 3 Room: Stereo Speakers (2.0) My question is - How do I connect the Zone 2...
  3. D

    Harman Kardon AVR 70 AV REceiver 5.1 Channel - Works Great!!

    Remodeling my home theater setup and have some previous equipment that still runs great. Can't find the remote. Asking $120. Pickup in Tomball / Woodlands Area. email me at [email protected] for details.Thanks.
  4. Gort69

    4K HDMI switch or new AVR?

    Greetings, Earthlings - I come in peace. I just bought a new 4K Blu-ray player. It has 2 HDMI outputs (Audio + Video and Audio Only) right now, I have to use both since my Denon AVR doesn't pass 4K. The audio out goes to the DVD input on the receiver and the A+V output goes directly to the 4K...
  5. G


    i’m almost afraid to ask this question. i have an old sonos and they are offering a trade up program with 30% off on a new system including their home theater 5.1 with 2 speakers, sound bar and a sub. i like the wireless aspect but is trying to compare a sonos 5.1 home theater speaker system to...
  6. A

    Harman Kardon AVR 335 Vs Onkyo TX SR313 Comparison

    dears, I'm novice to here and I would like to get to know which is better in the following Harman Kardon AVR 335 Vs Onkyo TX SR313 your advices matter. Thanks
  7. S

    Avr x3300 rear sound come from front

    Last week I made update to the Receiver. Now ,when I play sound that is supposed to go to the rear speakers it comes out of the front speakers. I'm connected in Bi-amp Made the test trough YouTube 5.1 test movies. I try trough BD- not works I try trough HDMI ARC - not works I try trough...
  8. Shivam

    SMPS with Avr

    Can i use smps 12 volts wire output yellow wires for my yamaha v585 avr. Will it protect surge and voltage fluctuations? I have connected input of smps to my central home stablizer.
  9. C

    Denon Receiver AVR - 883 When in the tuner mode there is no sound when in FM mode.

    I have a Deon AVR - 1803-883 receiver I only have the front speakers hooked up and a CD player when the CD player is on I have sound but when I put in the Tuner FM mode I get no sound when it is in the AM mode all I get is static.
  10. A

    Setting up new AVR, Blu-Ray to Non-ARC TV

    Hi, total beginner here so forgive me if I make no sense! I have a new Marantz SR6013 and I want to connect it to my non-ARC TV HDMI. I am also connecting a Blu-Ray and my DirecTV. Again, I have HDMI but it is not ARC. If I use a Digital Audio Cable, from my TV to the AVR, will all sound come...
  11. P

    New AVR for Polk LSi 9 and LSi 7 4 ohm Speakers

    Hi All, I need to replace my ailing Pioneer SC-1523 Receiver. My old LSi speaker system is 4 ohm. I am pulled between getting a Marantz 6013 with AB amps or the Pioneer SC-701 with Class D3 Amps. I have a sales person telling me I would be making a mistake by getting away from...
  12. Raphael Serrano

    Harmon and Kardon avr 700

    Everytime i watch a movie after approximately 1 hour the receiver shuts off with no notifications on display. Has anyone know about this problem?? Thanks, Raymond
  13. greggor

    It looks like it's time for a new AVR.

    Some of you may already be familiar with my 4K issue with my Pioneer SC67. I purchased a 4K DVD player to replace my failing Sony Bluray player and the new player was unable to pass both video and audio through the same HDMI output. To use the player in my system I had to run a second HDMI...
  14. M

    Denon AVR playing weird alarm sound???

    Hello, I am having a Denon X1300 AVR device. Sometimes the device is playing a weird alarm sound. The sound is really loud and the only way to turn it off is to turn off the receiver. I have no idea what is going on. Also it is completely random at what time the sound is playing. The receiver...
  15. nohackmove

    Hello to everybody

    Hi All, I am a rookie person for Home Audio - Video Systems. I have purchased a Marantz NR1607 two year ago, and purt together with Canton Movie 85 CX 5.1 Speakers for my home theater system build. I was looking for a community to get in touch with other interested people with AVR systems for...
  16. B

    Dolby Vision pass-through AVR or TV?

    I have an LG OLED TV compatible with Dolby Vision, my blu-ray is also Dolby Vision capable, and my AVR is also Dolby Vision capable. Was wondering if it makes a difference whether my DVD player passes the dolby vision video signal through the AVR first or if it's better to send it straight to...
  17. M

    Fiber optics coming need new AVR

    Greetings from Mexico. After 11 years of living in an Internet wasteland, with service being below 2 mg download, making streaming a 50/50 opportunity at best, our area south of Guadalajara is getting fiber optics. Around 50 mg download! So upgrading from my Onkyo HT R391 is a better option...
  18. P

    7.2.4 avr

    Hi, I'm planning to make a 7.2.4 system. Which is the most economical avr with dolby vision? Do I need an additional amp to power two speakers with this avr? Thanks.
  19. I

    Passive to Active Subwoofer convertor for Denon AVR 2312ci

    I recently upgraded my AV Receiver to a Denon AVR 2312ci I found at a thrift store for $30! It works very well! The only problem is my old receiver used a passive subwoofer and my new (to me) Denon uses an active port. I was reading that I needed an amplifier to use my passive subwoofer. I found...
  20. Fraser8322

    4k with an older avr

    Hi so I just got my first real home theatre setup. Got the 4k lg tv, a pioneer vsx932 amp and a set of elac debut 5.2s for a 7.1 set up. I got the amp cheap through Ebay as it was a run out model. While I'm happy with the amp and the features I've read alot about a decent amp making a big...
  21. C

    AVR for $1,000

    I'm asking for a friend. He has $1000 to spend on a home theater receiver. He is just starting to build his home system and renting a home for the next year so the room size probably shouldn't be factored in. He will also eventually update his speakers. He can get a Yamaha RX-V2085 or a Denon...
  22. R

    New Marantz AVR - speaker Buzz

    Hello! I’ve recently swapped out an Onkyo TX-NR1010 AVR in my 7.2 home theatre system to a Marantz SR7012. After hookup and calibration I’m hearing audible (and irritating) buzz through all 7 speakers. I went though the process of disconnecting inputs one by one to determine th source and I...
  23. T

    Denon AVR x 4300 audio decoder switching problems

    I have a Denon 4300 connected to a Trek tuner TUNVR1 connected by HDMI. The tuner says it is putting out Dolby digital. The input on the Denon is set for an HDMI only input (no other audio source is listed as connected). The on screen info from the Denon shows the input info pcm stereo. How do...
  24. John Sparks

    FS: ONKYO TX-SR608 7.2 AVR

    Audio Decoding: Dolby: TrueHD, Digital 5.1, EX, Pro Logic IIx/IIz DTS: DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS, ES, 96/24, Neo:6 Audyssey: DSX, Dynamic Volume, Dynamic EQ Other: All-channel stereo, full mono, THX Loudness Plus 3D: Yes THX Certification: Select2 Plus Number of Amp...
  25. E

    Old Sub woofer's cable is not compatible with the "sub woofer out" in the AVR

    Hello everyone, our old LG "home theater in a box" sub woofer's cable is ran through a hole and sealed with a wooden wall from one side (We can't access it to change the cable) and from the other side (the one you connect to the receiver) it has a weird jack: How do we fix this so we can...
  26. David Flora

    New Denon AVR X8500H Begs Questions on Speaker Placement....

    By now hopefully some of you have seen the new Denon X8500H, and wow is it NICE. I'm already scheming on how I'm going to break the news to my wife that this is going to be the new baby that runs my home theater! Anyway, I'm nearly finished with my basement home theater, and I initially wired...
  27. M

    Help with projector, AVR, PC Setup

    Hello - I've moved and am trying to set up my projector to play the audio/video I'm streaming through my PC. I've had this same PC/video card with dual-monitors, AVR, and projector setup working in my previous two homes, so I'm clueless/frustrated as to why it isn't working now. I had it...
  28. L

    Plex Server to Chromecast - to HDMI on Samsung TV - Optical Dig. out of TV to Harmon Kardon AVR 525

    Hi - I have an older (no HDMI) Harmon Kardon AVR 525. I am streaming content from a Plex Server to a Chromecast plugged into an HDMI on a 2008 Samsung Plasma.... and then outputting Audio from the Samsung via a an optical digital link to the HK receiver..... My speakers are a 5.1 configuration...
  29. E

    Help connecting Smart Tv w/ AVR

    Hello folks, I am not a newbie but this is not necessarily my thing. I have a Vizio Smart TV D39h-D0 connected to an Onkyo HT-R560 with Verizon Fios. The problem I am having is that I can obtain picture & audio to the tv via the AVR but I cannot get audio via the Smart Tv (youtube is what I...
  30. M

    Yamaha AVR 3070 or Denon AVR X4400H

    I narrowed down my choice for a new receiver between the Yamaha 3070 and Denon 4400, can anyone recommend one over the other? If anyone owns one of these I would like to hear your thoughts on them. Thanks