Analog Output Problems

Discussion in 'Beginners, General Questions' started by Doug MacGregor, Mar 21, 2004.

  1. Doug MacGregor

    Doug MacGregor Stunt Coordinator

    Joined:
    Nov 23, 2002
    Messages:
    84
    Likes Received:
    0
    How likely is it that one of the analog output channels on a 9 month old Hitachi DVD/VCR Combo Unit is malfunctioning?
    It is a model DV-PF73U.
    I completed the installation on my parents HTIB yesterday and everything checked out except the Right Analog DVD/VCR channel connected to the Receiver. The best I could get was about 20% volume.
    It was not a cabling problem because I swapped cables just to make sure.
    Or how likely is it that the Right Analog VCR input on the Receiver is not functioning? I did not think to try one of the auxiliary inputs on the Receiver to verify that theory.
    I will definitely try that.
    Thanks.
     
  2. Sean Conklin

    Sean Conklin Screenwriter

    Joined:
    Oct 30, 2000
    Messages:
    1,720
    Likes Received:
    0
    Try that and let us know. [​IMG]
     
  3. Doug MacGregor

    Doug MacGregor Stunt Coordinator

    Joined:
    Nov 23, 2002
    Messages:
    84
    Likes Received:
    0
    Problem solved.
    Don't understand it but when I went yesterday to do final setup, everything was OK.
     

Share This Page