Search results

Not sure if I am in the right forum, but I'll give it a try. I have paired my Jabra Elite 7 Active earbuds to my Yamaha TSR-7850 receiver. Problem is that the voice is out sync. Would appreciate knowing how to sync the buds to the Yammy? BTW, if I can sync, will the syncing effect syncing when...

The outer plastic covering of all the power adapter wires are disintegrating, and I would like to replace the power adapter. It appears that Sennhauser no longer supplies this adapter and I have to get it elsewhere. However, as strange as it may sound, I know that such adapters are out there...

I would like to know how to pair my Jabra Elite 7 Active earbuds with my Yamaha TSR-7580? I have done my research, but to no avail. Basically, I pressed Bluetooth on the AVR's remote, set all BT functions of the AVR showing on the TV screen to ON, enabled pairing with earbuds by pressing the...

Not sure if this is the right place, but I'll give it a try anyway. Until recently, I was able to hear sound from my Sennheiser TR 175 when hooked into my AVR Yamaha TSR 7850. The hook up was via left/right audio analog ports at the back of the AVR. I also had to have the AVR set to Zone 2 so...

Today at 4:51 PM I have a 5.1 setup, and am using a URC-2025BC-2 remote to control the TV, STB...

This may not be the right place or the right forum, but I'll give it a try. I have a home surround sound system that is served by Hotwire, and I'm using their Fision URC remote control (URC 2025BC2...). Until recently, when selecting "Watch TV," the STB, the TV and the AVR (Yamaha TSR-7580) all...

I have a TSR-7850 (for manual go...

I have a Yamaha TSR-7850 and have initiated my PC's iTunes Airplay between the two, and it works just fine. However, I note that after playing through Airplay and then closing the iTunes app, the Yamaha screen still shows "Airplay." OK, I know that the receiver is on standby, and when Airplay...

So, I've got iTunes (v 12+) on my PC (Windows 10 20H2) and would like to play the music through the receiver. Have wifi in house, but no smart phone. But, I just can't get it (viz., read the manual to no avail) and would appreciate it if someone can give me some guidance. Thanks.

I would like to get the Vizio V-Series 2.1 soundbar (https://www.vizio.com/en/sound-bar/v-series/V21-H8) for my LG 55OLEDC8pua (https://www.displayspecifications.com/en/model/6c9c116d). However, as I'm not too good at determining whether or not this sound bar is compatible with the TV (i.e...

Setting up a new Yamaha 7850 with an older TV (Panny 50V10) that doesn't have ARC. On page 30 of the downloaded manual, it says that "If TV doesn't support ARC, a digital optical out cable is needed." Although I did some reading as I am not familiar with ARC, it was my understanding that I...

Not sure where to post this need for help, but as it has to do with my Panny P50V10 (almost 10 years old and still has a beautiful picture,) why not here? Although my set has the capability of of accessing the internet and to stream, I have hardly ever used this function. Recently, my HOA...

I have just gotten a new LG 55C8 and will be needing two new 6' HDMI cables. One will go to the Hotwire box and the other to my Fire TV Stick. I intend to buy from Monoprice. Will I need any kind of "special" (like a high speed one) cable or will just a "regular" HDMI cable do? Thanks.

Units: Panasonic TC-P50V10 (Manual: https://www.manualslib.com/products/Panasonic-Tc-P50v10-3586225.html) Yamaha RXV800 (Manual: http://www.manualsdir.com/manuals/229633/yamaha-rx-v800.html) Panasonic DMP-BD85 (manual...

I have the Yamaha rxv-800 (to download manual: http://download.yamaha.com/search/pr...uct_id=1064064) and am using a Paradigm PD-8. We recently had a thunder/lightening storm that fried the board within our security panel, and also may have done something to either the sub or the AVR. For the...

On page 42 of the Yammy manual, are the instructions for setting DD LFE Level (10A) and DTS LFE Level (11). I am having trouble understanding how to implement the signal (put on test tone when in 10A/11?) and how to adjust the level once the signal is running? Is this just for sub adjustment or...

I've repaired (new foam surround) my 10-year old Paradigm PDR-10 and am now testing it to see if I want to keep it. If I feel that it wasn't doing a good enough job (80% TV/movies and 20% music, on Paradigm Monitor v3 mains and Paradigm Cinema v1 rears, Paradigm CC170 center in a room 17x25x10...

Confusing, yes. Let me explain better. Let's say that why I turn on the Yammy, the volume reads -45db. And as I increase the volume, the reading goes to -30, for example. Why is volume minus in the first place? I can see that a lower minus does indicate things are getting more positive...

Have a 10 year old PDR-10 that has a rumble in it. The rumble appears to be coming from the speaker itself. I would like to examine the speaker, but the grill is firmly attached to the box and I can't get to it. BTW, it is noted that the grill isn't attached normally; ie, not by attachment clips.

I would like to get a 12" sub within the $250 range, but I am limited by the size of the cabinet it must fit into; although, I will take it out of the cabinet when in use. The cabinet is 18" deep and 14.5" wide. Room is tiled flooring and is ~15 X 15 with a peaked ceiling of about 12'; and is...

Been getting an increasing rumbling sound from my 10 year old sub as its level turned up (not even a third of the way). Came across a 2010forum post of mine in which I had a noise problem with this sub. Opened the back and found some wires dangling. Taped them up and the noise was gone. Figured...

I will be replacing my sub (considering both front and bottom firing subs in $150-200 range for primarily movies - don't need to shake the walls down, just some reasonable bass effects, and non-audiophile type music listening) and I'm in a quandary about its placement. I have to keep it in a...

My system is about 12 years old, comprising of : Yamaha RXV800, Paradigm bookshelf speakers (Mini Monitor series for mains, Cinema v.1 for rears, PDR-10 subwoofer, and a Paradigm center channel - don't recall the model number but it goes with the system). It appears that the sub has seen better...

Have this 8 year old Paradigm sub that appears to ahve a rattle in it when I turn it's volume up. I really don't play it hard at all and the rattle does usrprise me. Anyone hazzard a guess as to where rattles are most likely to be? Should I try to take it apart (how?), or just let it be?

I'm not sure how to calibrate the speakers through the Yamaha rxv-800. I've got the sound meter and Avia, but what I can't figure out is when I am playing a test sound from Avia (let's say the left main), how do I use the Yammy's controls to get the desired level out of that speaker? For...

Have Linksys WET610N gaming adapter and need to set it up so that my Panasonic 50V10 can get with the internet. In the instructions for setting up the adapter I've got to first do some settings via my router and then take it over to where it will be installed in the TV. There is a blue...

My setup: Panny BD85, Panny 50v10, Yamaha rxv800 (no hdmi), Paradigm speakers (set to small) and a PDR-10 SubW. As the 800 has no hdmi input, I have made sound connections between the 85 and the 800 via both an optical cable and analog cables. My intent with this sound setup is to be able to...

Have WET610N and need to set it up so that my Panasonic 50V10 can get with the internet. In the instructions for setting up the adapter I've got to first do some settings via my router (next to my desktop) and then, within a short period of time, take it over to the TV for final settings and...

I've got a Yamaha rxv-800 that will be used in conjunction with a Panasonic BD85 bluray player. As there can not be an hdmi connection between the two, I would like to use both optical dig (for CD/DVD music) and analog connections (for BD movies) for my 5.1 sound system. It is my limited...

I have had my Yamaha RX-V800 for about 10 years and I have yet to figure ou how to optimize the Parameter Settings for any particular input source. I tried today with the Movie Theater inputs (the ones I am most interested in setting) , but as usual, I drove myself a bit daffy trying to "hear"...