Using Avia to adjust tilt? (1 Viewer)

[MarcVH]

Hi,

I'm using the Avia test disc to calibrate a Toshiba 32AF41, but I'm unsure how to set the tilt. I've been using the Circle Hatch test patterns to try to line it up so that the horizontals are horizontal and the slight vertical distortion near the edges is symmetrical; this ends up giving a tilt of about +5 for me. Is that the best way, or is there are more appropriate one?

 

[Kevin P]

Any of the geometry grids (crosshatch, circle hatch, etc.) should do the trick. The Overscan pattern would work pretty well too.

KJP