setup

Discussion in 'Speakers & Subwoofers' started by Zack<P>, Sep 14, 2004.

  1. Zack<P>

    Zack<P> Agent

    Joined:
    May 23, 2004
    Messages:
    36
    Likes Received:
    0
    Trophy Points:
    0
    ok just got my new B&W 602s3 for my mains .my speakers are now 601s2 for my rear a nero60 center channel and the 602s3 the sub is a validyne 10 inch powered sub .my room size is close 15 x 15 .does it matter if i put the rearsat ear level instead of mounting them on the wall pointing down .now the mains should i place them in the corners facing the middle of the room or what?
     
  2. Robb Roy

    Robb Roy Supporting Actor

    Joined:
    Jul 15, 2002
    Messages:
    711
    Likes Received:
    0
    Trophy Points:
    0
    Zack,

    http://www.dolbylabs.com/Consumer/Ho...ainment/Setup/ is a good read.

    If you can't raise your surrounds, but your receiver has appropriate delay settings, you should be OK.

    As to the mains, I wouldn't put them in the corners. I would try to bring them away from walls (next to and behind) as much as possible.

    I hope that'll get you started.

    -Robb
     

Share This Page