New HT won't decode correctly

Discussion in 'Speakers' started by Brian*D, Jul 30, 2004.

  1. Brian*D

    Brian*D Auditioning

    Joined:
    Jul 16, 2004
    Messages:
    11
    Likes Received:
    0
    Hey everyone,

    Sorry if this is not the right place to post this:

    I just bought a Sony HT and it's all set up, except that it won't decode in 5.1 or DTS. In 5.1 it simply uses R L SW and it won't play anything in DTS at all. The coaxial is connected between the receiver and the DVD player and I ran a test tone so all the speakers are connected correctly. I don't know why it won't decode. Any help would be appreciated.
     
  2. DavidCooper

    DavidCooper Stunt Coordinator

    Joined:
    May 21, 2004
    Messages:
    230
    Likes Received:
    0
    Usually you have to set it up in the DVD menu. You might check your settings there and see if that does anything.
     
  3. Brian*D

    Brian*D Auditioning

    Joined:
    Jul 16, 2004
    Messages:
    11
    Likes Received:
    0
    I figured it out; it was the settings in my DVD player. Thanks. This thread can be closed.
     

Share This Page