Toshiba 40H80 3:2 pulldown question (1 Viewer)

[Todd_C]

I'm trying to activate the 3:2 pulldown in my Toshiba 40H80 per Michael TLV's tip at Keohi's HDTV website. I've used my Pronto remote to enter the ADDR menu.
My questions:
1. Is "upper ADDR" menu referring to the "UPCON" menu?
2. When I scroll to "17FH" the data is 80 not 80H. Is that a problem? Did I not scroll to the correct parameter?
3. Under the "17FH" parameter I can't change the data to "07H" just a 07 or a 07F.
Thank you for any help.

 

[Michael TLV]

Greetings

Yes it is the upcon ...

and make it 07 ...

Regards

 

[Brian Glaeske]

Just to clarify, the H at the end of these numbers indicates a hexidecimal number as apposed to a decimal one.

That way if you see 69 and 69H you know they are NOT the same value.

Brian

 

[Todd_C]

I will make the change, and thank you very much for the clarifications.