Have this setup is it good for anything?

Discussion in 'Home Theater Projects' started by Joe_Woytasik, Jan 9, 2004.

  1. Joe_Woytasik

    Joe_Woytasik Auditioning

    Joined:
    Jan 5, 2004
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    0
    I have this orion cobalt svc left over from an old car stereo
    Fs 36 Hz
    Qts .71
    Vas 2.83 cu. ft.
    SENSITIVITY 92 dB
    LINEAR EXCURSION 8.5mm

    Is it decent enough to build a home theater sub out of it? I also have a sealed box laying around it is about 1.9 cuft. I want a sealed enclosure so please point me in the right direction.
    thanks- Joe
     
  2. GrahamT

    GrahamT Supporting Actor

    Joined:
    Sep 13, 2003
    Messages:
    556
    Likes Received:
    0
    Trophy Points:
    0
    It's probably worth buying a new driver IMO. The Fs and Qts are high and xmax is a little low. You can try putting it in the box and see if you like it but it will lack extension unless you go LT. You can download Winisd and put all the specs in to design a proper box if you like. I think if you want a HT sub then there are better options for not a lot of money.
     
  3. Joe_Woytasik

    Joe_Woytasik Auditioning

    Joined:
    Jan 5, 2004
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    0
    So is this box good for anything? Could I buy a driver that would work well in a small box like this one?
     
  4. Joe_Woytasik

    Joe_Woytasik Auditioning

    Joined:
    Jan 5, 2004
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    0
    Looks like a titanci mkII driver will work well in this enclosure.........what do you all think?
     

Share This Page