hdmi

I have correctly connected my cable box and BD player to the Denon Receiver, and I have yet to hear any audio out of my speakers. I am able to get audio out of the TV when I set the receiver to output audio through the TV. When I connect the BD player to the cable input and the cable box to the...

So I have a new 980TI, I have my old 1080p monitor hooked up via DVI, it works fine. I have 2 display ports and an HDMI out on the card. I want to send the HDMI to my receiver for surround sound. Doing that tho it identifies that I now have 2 monitors hooked up, despite the fact that there is...

Just rewired with all new HDMI cables into a new Pioneer receiver. All has worked great for a week. Worked fine earlier today. Now, nothing. I am not getting any picture, nothing, when I try to watch Blu-ray's. Nothing comes up. Just get a blue screen. "HDMI" is flashing on the front...

I love the idea of HDMI ARC, but I can't stand, or understand, the actual execution. In theory, I vastly prefer the player->TV->receiver chain to the more common player->receiver->TV chain. Since I often use my TV's speakers instead of the receiver, I don't like having to use the receiver just...

I have been doing some research on purchasing a 4x4 HDMI matrix splitter and one common problem plagues them all. And when you think about it, the problem makes perfect sense and can NOT be fixed. (But you can get around it, see below) Let’s say you have two TVs. One is 3D capable and the...

If I purchase this switch, will it work in the US without any problems? I didn't know if there were NTSC/PAL differences as far as HDMI cables/switches go. http://www.ebay.com/itm/4-PORT-WAY-MANUAL-HDMI-SWITCH-BOX-HIGH-SPEED-3D-HUB-INPUT-SELECTOR-SPLITTER-/370732101269? Or does anybody know...

so I have 3 "Video Displays", A projector and two televisions all have an HDMI input. I have a cable box, DVD player, Apple TV, and Sonos connect as Inputs. I need a way to run different video streams from the receiver to the "Video Displays" without spending more than $1000. This is tricky...

I think I need a low-cost 1080p HDMI monitor, to use for configuring my HTPC. It's a nuisance to power up the projector, and use it for Windows desktop, anytime I want to work on the HTPC. It's also probably not great for the projector. But I won't use the monitor much once the PC is configured...

Specs: Dell Insperon Windows 10, upgraded from windows 7, same issue. 64bit Yamaha RX-V765 Sharp Aquos Okay, So I am running an HDMI from the PC to the AVR but it only sends Stereo sound. I pull up the Control Panel and select Manage Audio Devices. I get two options (forgive me I am not...

Hello! Lenovo y50-70 (computer) LG 55EG910V (tv) Sony BDV-N7200W (home theather) The home theater system is not very nice to me. I can't play sound from my tv on it with a HDMI cable between the ARC-input on the tv and the ARC-output on the system (the tv is set to put out audio on the...

Due to an upcoming move, I'll need to purchase several items to re-install my gear again. I was lucky enough in my old installation to have a closet on the other side of the wall from the tv. That closet is where my equipment was located. This time, the equipment closet will be located about...

My TV has an HDMI input with ARC (Audio Return Channel) which supposedly can send any sound from the TV itself back to the receiver it's connected to. My receiver however is just a bit too old and does NOT support ARC, and I've verified that if I connect this to an input on the receiver it will...

I'm going to need a 25' - 40' run of HDMI cable for a 1080p projector. (The conduit length is 25' port to port. Depending on where I place the projector and the electronics, that could add 5' to 15' to the total distance.) (I prefer a single HDMI, since it will should be easier to pull through...