I have a STRDH790
It got an update receiving EARC, the specs list it as HDMI 2.0 or is actually 2.1?
With the purpose of HDMI 2.1 EARC being that it allows the audio to be uncompressed full quality with a 2.1 EARC TV
My question is, if it is HDMI 2.0 with EARC is the same? Or is it only...
I got a new TiVo Bolt, model # TCD849000VO. My TV, a Samsung PNC50C7000, has 4 HDMI inputs. I plugged the TiVo into HDMI 4 and it worked great. I then unplugged the TiVo and moved it to the shelf where it's going to normally be. I plugged it into HDMI 1 and got a picture that was mostly red...
Afternoon all.
Just joined and my first post so apologies if I have posted in the wrong place - wasn't sure from the content of the forums where this should best sit.
I'd appreciate some advice please.
I am wanting to route sound (only) from my Samsung HT-C5500 Theater box to my Bang &...
Hello,
I'm having a problem with my TV not recognising the availability of an HDMI-connected source input.
My setup is as follows:
Panasonic 4K player (I have just acquired this)
Sony multi-region Blu-ray player
Denon receiver
Panasonic 4K OLED TV
The TV has two HDMI inputs. The receiver...
It has been 10 years since I upgraded my home theater. I am going to completely disassemble my front cabinet and mount everything flush to the wall. I am going to lose the rear projector and get an ultra-short throw projector in a slide out drawer in the front. I also have a 60" wall mount TV...
my hdmi out will not hold my cable correctly anymore, is there a way i can hook up with my satellite box (DTV) with out using my hdmi out and still get 1080i?
Hello everyone,
I am a novice in this area and would be very grateful for any help with finalising the hardware spec list for our cinema build.
Although I am no expert on the 'tech' side of things I do greatly appreciate a beautiful picture and sound (hence this build!) and really want to get...
Setting up a new Yamaha 7850 with an older TV (Panny 50V10) that doesn't have ARC. On page 30 of the downloaded manual, it says that "If TV doesn't support ARC, a digital optical out cable is needed." Although I did some reading as I am not familiar with ARC, it was my understanding that I...
Just spent the better part of two days trying to troubleshoot my "new" (to me) Marantz SR7011 receiver,
The main problem is that I don't have any video out of the HDMI output ports,*(monitor 1,2,or3 (at least none are showing up on my LG smart TV) which does display my DVD movies without a...
I have just gotten a new LG 55C8 and will be needing two new 6' HDMI cables. One will go to the Hotwire box and the other to my Fire TV Stick. I intend to buy from Monoprice. Will I need any kind of "special" (like a high speed one) cable or will just a "regular" HDMI cable do? Thanks.
Anyone know of good recommendations or reviews for long-run HDMI cables for 4K use? I might need a new HDMI cable for my projector when it's 4K time. My run length is about 30-40 feet. I currently have a KeyDigital extender. It's spec sheet is:
Support for 4096x2160 or 3840x2160 24/25/30Hz at...
I have a home theater receiver feeding both a 4k tv and a 4k projector. The receiver only has 1 HDMI out. I bought a HDMI 4x2 HDMI switcher from Monoprice. After I hooked it up, it flashed when I tried to watch the tv and projector (separately). It never displayed what I was trying to watch...
First post. Looking for recommendations for an HDMI cat5/6 extender with IR integrated. I would prefer a unit that is sized for a single or dual gang outlet box. I’ve seen a bunch of stuff on amazon but other than going by reviews for folks that have had real world experience with components...
Looking at Blu-Ray player options for playing 4K UHD Redbox movies on my Samsung 4K UHD 3840 x 2160 40 JU7100. Want something that's great for 4K and 1080 Blu-Ray and audio. Just needs to do that well since I have a Roku 4 for streaming movies and TV and a Chromecast Audio for streaming music...
I'm configuring a small and very modest home theater out of equipment that I've assembled.
This is built around a Toshiba 55VX700U TV which is a bit of a strange animal if I say so.
Because of hearing loss, I'm using an analog equalizer and amplifier with RCA jacks. I'm not trying to get...
I really hate to be the guy that signs up for a forum just to ask for advice, but I have been battling an issue for some time now, and I can't seem to figure it out...Please help/give me some ideas....
I currently have a DISH Network VIP722K DVR that is connected to a Marantz SR4003 receiver...
Ok, so, this one seems strange to me, and hopefully you folks can help.
My setup is Chromecast -> Cheap HDMI switch -> Soundbar -> Projector (all hdmi)
And when things are plugged in this way, I probably get 1 second of silence every 5 seconds, but the video is unaffected.
Here's where things...
I have a new tv with hdmi arc capability. I am buying a soundbar..probably the Yamaha yas108. I understand I connect the bar to the tv via hdmi arc. That leaves one hdmi slot on the soundbar. But I have both the cable in and the DVD player to connect. How does this work? Thx.
When I turn on my receiver, it turns on my uverse box, blu-ray player, and roku streamer. This all worked seamlessly for several years.
Then recently, when I would switch to the blu-ray HDMI input, the receiver would turn off. I switched the cable, same issue. I switched the HDMI port, same...
So here's a weird problem.
I bought a Samsung Blu-Ray player about a month ago (model BD-J5700/ZA). Plugging it into my Samsung 32inch LCD TV with HDMI it was working fine. After about a week or 2 the audio stopped working. No audio at all.
Just the audio, as the video was fine.
Trying to...
Well I just lost the HDMI output on an A/V Receiver that I recently purchased, following a similar episode on my prior A/V receiver. (Both times involving lightning and loss of power to the residence.) The audio component works just fine, since it is split off before the HDMI output which...
The RX-V475 HDMI Out works okay when connected to a Smart TV but when connected to my Sony VPL-HW50ES Projector the signal is not getting there.
Have connected laptop to projector and also cable box direct, both on original cable to projector proving that cable and video to projector is...
This is a new development, as I have not changed anything in my setup for several years. Today, when I switched to the Blu-Ray player (using HDMI), the receiver turns off. this happens repeatedly. The other HDMI ports and inputs work fine (i.e. Roku, TV).
It is definitely the Blu-Ray player...
My Amp was hit by lightning strike through the coax cable from the pole. It blew out the HDMI Output port. I doubt there is no alternative to changing settings beyond sound settings via the app without on screen display.
I need a part number and source for a new/used HDMI board. Thanks
Moved into a house where the previous owners had a small closed for HT equipment. Surround speakers run from there and incoming cable is there. The problem is how they ran wiring to the other side of the room for the video feed for TV. In the closet there are 3 coaxial cables labeled blue...
Hi there people.My name is Mike and this is my first post here. I have a Marantz 8802a and 3 off my HDMI inputs on the back of it don't work properly. The DVD input just displays a blue screen saying no input when a device is plugged in and when i try to play it the screen does not change.The...
Ok so wife & I bit the bullet and bought a new receiver - Marantz 5012
before disconnecting our old Marantz I made sure to note down where everything was plugged into - we had HDMI''s and RCA leads plugged in to and from the Sky TV box to the receiver to the TV and same with the Blu ray...
Hi guys, i'm new in the home theater world and I have so many questions but I want to start with something simple.
I have an Onkyo av receiver (to be honest a cheap one, I plan to improve it next year) I use it mainly to listen to music and I want to get the best out of it.
My question is...
I bought a Pioneer Elite VSX-74TXVi for very cheap. I am passing DVD, TiVo, and an Amazon Fire stick through it. I'm not clear if the HDMI signal just passes directly through the unit and arrives at the TV same quality, or if there is some processing. Without going into detail, I got the...
Gday guys,
I have a Denon X4000, and when I use the Monitor 1 HDMI output to my projector, all I get is sound no picture for most inputs (for some reason Foxtel works but the media player, fetch box dont get picture).
But, if I use the Monitor 2 output everything works fine, picture and sound...