- View New Content
- Blu-ray, DVD, Streaming Video and Digital Downloads
- Home Theater Hardware
- Theaters, Remotes and Accessories
- Equipment Reviews
- DVD & Blu-ray Reviews
- Other Diversions
- Bargains and Deals
- Feedback and Testing
- Latest Blu-ray Deals
- Shop Amazon & Support HTF
- Theater Photos
DVD & Blu-ray Reviews
- Equipment Reviews
Blu-ray Release Listings
- Shop Amazon
- Support HTF
Strange set up in new home. What is this????
2 replies to this topic
Posted March 09 2013 - 04:22 PM
So I just moved to a new home (to us). There is a prewired room upstairs that I assume is for an in home theater. But the wiring is blowing my mind. Can anybody tell me what is going on? It's all very basic speaker wire in electrical boxes. Nothing fancy. I get the feeling the room was wired but never used. There are six electical boxes in the walls in this one big room. The TV side has one box down low and two up high, left and right. The back of the room has one box down low and two up high, left and right as well. Here's the strange part, some of the boxes have two speaker wires and some just have a full loop coming through the box.... I"m not sure what to do with two wires in one box or with the boxes that have a loop? The loops make me think the room was wired but not used. Which loops do I cut and use? And why is there a low box on both front and back of the room? Any ideas? Thanks much, Steve
Posted March 10 2013 - 03:51 AM
Just a guess of course, 1 low, 2 high in front = 1 center, and 2 smaller speakers mounted up high 1 low, 2 high in back = 1 subwoofer and 2 surround speakers OR....the same as the other side in case they weren't sure where the tv/screen was going? Which ones have the loops? Tom V.
Posted March 10 2013 - 04:49 AM
Do you know where the other ends of the wires are? You're going to have to figure out which ends of the wires match up to the other ends unless they are labeled. The loops are kind of strange. There must be two ends for each loop. Maybe they just didn't finish pulling the wires all the way out of the wall. In any event, there is no way to use a loop so you have to either find both ends of the wires, cut them and figure out which one to use or pull them all out and start over again. If the lower one in the back is a subwoofer they must have planned on using (an inferior) passive subwoofer. BTW, speakers up that high generally don't sound as good as those placed a little lower. And there shouldn't be that large of a gap in height between the fronts and the center. Makes vocals sound like they're coming from three different places. But, sometimes you have to work with what you have.
"Everyday room": Panasonic 58" Plasma, Dish HD DVR, Pioneer Elite vsx-23, BDP-23 BR, dv58avi universal dvd player, Paradigm Studio 20 V1, CC-450, Dayton HSU-10 subwoofer.
"Movie/Music room": Toshiba 65" DLP, Dish HD receiver, Marantz 7005, CC-4003, BD-7006, Polk LSI25's-LSi7's-LSiC, 2 original Dayton 10" "Mighty-Mites" subwoofers. (subject to change without notice).
Also have MB Quart Vera VS05 +.....too much to list. Help me.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users