Loewe Planus - Service Menu

Discussion in 'Displays' started by Alexander C, Sep 11, 2003.

  1. Alexander C

    Alexander C Auditioning

    Joined:
    Nov 29, 1999
    Messages:
    2
    Likes Received:
    0
    Hi
    Does anyone know how to access the Service Menu for this TV?
    I need to enable the acceptance of a PAL video signal to the AV input. Apparently this can be done through the Service Mode (Option Byte 1 Bit 6 has to be changed from 0 to 1)

    Thanks for any input.
     
  2. JeremySt

    JeremySt Screenwriter

    Joined:
    Aug 19, 2001
    Messages:
    1,770
    Likes Received:
    14
    Real Name:
    Jeremy
    I know how to do it on the Aventos and Aconda, and I think the Planus is the same. on the front panel of the tv, hit the button labled with the counter clockwise arrow. This will bring up a screen menu. the last option is "service." Highlight that option, then hit the "M" button on the remote control.

    Be careful in this menu, there are many geometry adjustments that can severley alter your image. Also remember, no adjustments are saved unless you hit the "enter" button after any individual change is made.
     

Share This Page