7200 - help with Multi-room setup

Discussion in 'AV Receivers' started by Kamil_k, Sep 8, 2004.

  1. Kamil_k

    Kamil_k Extra

    Mar 15, 2004
    Likes Received:
    On my HK AVR 7200, I decided to use my back channels to get audio in another room, but am going about this slightly differently (I think). I am using a Home Theater Master MX-600, which uses a transmitter so I can control a component without IR line-of-sight. The remote works as it is supposed to.
    I have wired my DVD player to the DVD input, the HD STB to Video2 and am running component monitor out to the remote room for video. This also works fine.
    I set the Advanced menu to use Multi-Room for SB. The speakers are properly wired. But- no sound to the remote room. What am I doing wrong? I am not using the zone 2 remote because, well, this is not *strictly* a zone two operation. (Not really sure how to set up the RS232 port, etc.)
    Shouldn't the speakers work the way I set them up? Please help...
  2. Wayne A. Pflughaupt

    Aug 5, 1999
    Likes Received:
    Katy, TX
    Real Name:
    Piece of cake - you need to connect the DVD player’s analog L/R audio outputs to the receiver.

Share This Page