need help wiring three way crossover from PE

Discussion in 'Home Theater Projects' started by JoeGibs, Sep 22, 2005.

  1. JoeGibs

    JoeGibs Stunt Coordinator

    Joined:
    Nov 5, 2004
    Messages:
    116
    Likes Received:
    0
    i bought some three way crossovers from parts express. they can be found HERE

    on the bottom, it has one connection labeled "M", then a set of three connections with the letter "C" above them, then another single connection labeled "W" and another single connection labeled "T". then on the top of the xover it has a single connection labeled "C" and another sincle connection labeled "IN".

    little help?
     
  2. Brian Fellmeth

    Brian Fellmeth Supporting Actor

    Joined:
    Jul 30, 2000
    Messages:
    792
    Likes Received:
    0
    "C" stands for common. So, the "in" and one of the commons go to the posts on the back of the box. Make sure you know which post goes to C for each box so you don't end up with a phase problem. Then the other three commons go to your drivers (one each) on the unmarked lugs. The marked (or +) lug are connected to T,M and W for tweeter, mid, and woofer respectively.
     

Share This Page