QUICK: connecting sub to receiver

Discussion in 'Speakers & Subwoofers' started by scottAtah, Sep 13, 2004.

  1. scottAtah

    scottAtah Extra

    Joined:
    Aug 20, 2004
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    This may be really simple, but i've never done it before.

    Purolator just dropped off me paradigm sub. I asked buddy to ship a cable along with it, and thus there's a single monsterbass subwoofer interconnect.

    Problem is, rear of speaker has two left/right connects, one for low level input and one for high pass output. Obviously i need to be working with the input. But the sub has a L/R connection whereas the subwoofer interconnect is a single coax/rca type cable. On top of that the one channel (red) on the sub, does say LFE Sub in beside it. That mean i can just hook the single interconnect up to that channel and to the sub out on the receiver and thats all i need? don't have to use a L/R channel type configuration?

    (Materials in use Paradigm PW-2200 and Panasonic SA-XR50 receiver)
     
  2. Chris Quinn

    Chris Quinn Screenwriter

    Joined:
    Jan 12, 2003
    Messages:
    1,127
    Likes Received:
    0
    Trophy Points:
    0


    Yep.
     
  3. scottAtah

    scottAtah Extra

    Joined:
    Aug 20, 2004
    Messages:
    16
    Likes Received:
    0
    Trophy Points:
    0
    Beaut thanks.....I Tried that it didn't work.

    Took me a while to figure out/remember i had to enable the sub thru the receiver! Doh!

    Thanks!
     

Share This Page