Need help adjusting the color on my rear projection toshiba

Discussion in 'Displays' started by Brian Bowles, Mar 16, 2005.

  1. Brian Bowles

    Brian Bowles Second Unit

    Joined:
    Dec 3, 2001
    Messages:
    256
    Likes Received:
    0
    Trophy Points:
    0
    I had to have the board in the front of my Toshiba 65hdx82 replaced. It is the one with the six knobs that control the amount of each color. The picture is close but not quite as good as it was. At first there was a little too much blue so I turned the top left knob to the right. This helped. Is there a way for me to get a better adjustment of the colors by myself. Before my tv looked great. Now it looks good. There is no one in my area that speicalizes in calibration. Thanks!!!
     
  2. PerryD

    PerryD Supporting Actor

    Joined:
    Aug 28, 2000
    Messages:
    737
    Likes Received:
    0
    Trophy Points:
    0
    Are you using the blue filter in Video Essentials to set the color?
     
  3. Brian Bowles

    Brian Bowles Second Unit

    Joined:
    Dec 3, 2001
    Messages:
    256
    Likes Received:
    0
    Trophy Points:
    0
    No I an not using that.
     
  4. Michael TLV

    Michael TLV THX Video Instructor/Calibrator

    Joined:
    Mar 16, 2000
    Messages:
    2,909
    Likes Received:
    1
    Trophy Points:
    0
    Location:
    Calgary, Alberta
    Real Name:
    Michael Chen
    Greetings

    The knobs are macro controls and used for setting up the tv image only . not for fine tuning.

    You need to fine tune with the cuts and drivers in the service menu.

    If you need a calibrator ... simply book one from this site's Lion A/V link and Gregg Loewen will come to you.

    regards
     

Share This Page