LFE Connection with my Denon 3802 - Newbie

Discussion in 'Archived Threads 2001-2004' started by Scott Kroll, Feb 8, 2002.

  1. Scott Kroll

    Scott Kroll Agent

    Joined:
    Jan 9, 2002
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    0
    The back of my 3802 only has the one Red Subwoofer output which I am plugging the cable into, but on the Sub itself I have a matching Red input and a White LFE input. Which one should I use?
     
  2. John Tompkins

    John Tompkins Supporting Actor

    Joined:
    Aug 30, 2000
    Messages:
    660
    Likes Received:
    0
    Trophy Points:
    0
    Scott, it really does not matter, as you only need to hook it up to one connection on sub. Some subs will say mono below the l/r- red/white connection. Or you can buy a cheap y splitter from radio shack and hook it up to both[​IMG]
     
  3. Bill Kane

    Bill Kane Screenwriter

    Joined:
    Feb 5, 2001
    Messages:
    1,359
    Likes Received:
    0
    Trophy Points:
    0
    easy one -- You are sending a mono, line-level signal to the sub amp. It makes no difference which input you use; listen to both! (keep volume way low if yoy do unplug to avoid the speaker "crackle-pops."
     
  4. Scott Kroll

    Scott Kroll Agent

    Joined:
    Jan 9, 2002
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    0
    Thanks for the help
     

Share This Page