Defeating a Velodyne F-1500 Crossover? (1 Viewer)

[Greg.E]

Anyone know if the internal/adjustable crossover in the Velodyne F-1500 can be defeated or eliminated. It's so old it does not have the "sub-direct" feature that many new subs have. I'm pretty handy with solder, so I'm not opposed to opening up the amp section.

 

[matthew]

Turn the crossover to like 200hz and whatever the maximum high is so it wont interfere with receiver crossover point.

 

[quyen_nguyen]

Hi GREY
All you have to do is remove C5 (1uF) and replace R6 (820 OHM) with a jumper on mother board and turn the xover pot to 40hz.

good luck.