LucasL
Grip
- Joined
- Jun 19, 2003
- Messages
- 18
Hi everyone.
I AUDAX diy Kit ready to go with the speakers and custom crossover made from Madisound specifically for this kit.
All that needs to be done is have the enclosures built. I have all the paper work that shows how to build the enclosures but never got around to getting the project complete.
all speakers are brand new in original packaging.
heres the list:
kit is 1 center channel, two front (left and right) and tewo rears (left and right) the front are MTM design. all soeaker are shielded.
5 - TM025F1 textile dome tweeters
http://www.hautparleur.fr/_audax/tm025f1.jpg.
1 - AP130ZO 5 1//4" Aerogel Midbass
http://www.hautparleur.fr/_audax/ap130z0.jpg
8 - AP170ZO 6 1/2" Aerogel Midbass
http://www.hautparleur.fr/_audax/ap170z0.jpg
Crossovers:
9 individual xover pieces total
2 - Audax Front xovers
1 - Audax Center xover
2 - Audax Rear xovers
Madisound sold the kit for $1200+ I believe (cam with precut cabinets)
I am willing to let it go for $699 plus shipping (UPS ground fully insured)
I have a 350 watt Plate amp also for home theater. its NEW/MINT condition( I never used it)
250w into 8ohms at .1%THD
380w into 4ohms at .1%THD
Signal to noise: 101DB (a-weighted)
Bass bosst EQ - 6DB @ 30hz
dimesnions: 12-3/8" W x 10-7/16" H x 4-3/4" D
weight - 12lbs
voltage - switchable 115/230v, 50-60hz, 750W
crossover control contin. variable 40hz-160hz at 12DB octave
phase 0-180degrees
line inputs (rca)
and Line outputs full range 20-20khz (can daisy chain to other amps)
Not sure how much its worth. so let do $150 OBO
I AUDAX diy Kit ready to go with the speakers and custom crossover made from Madisound specifically for this kit.
All that needs to be done is have the enclosures built. I have all the paper work that shows how to build the enclosures but never got around to getting the project complete.
all speakers are brand new in original packaging.
heres the list:
kit is 1 center channel, two front (left and right) and tewo rears (left and right) the front are MTM design. all soeaker are shielded.
5 - TM025F1 textile dome tweeters
http://www.hautparleur.fr/_audax/tm025f1.jpg.
1 - AP130ZO 5 1//4" Aerogel Midbass
http://www.hautparleur.fr/_audax/ap130z0.jpg
8 - AP170ZO 6 1/2" Aerogel Midbass
http://www.hautparleur.fr/_audax/ap170z0.jpg
Crossovers:
9 individual xover pieces total
2 - Audax Front xovers
1 - Audax Center xover
2 - Audax Rear xovers
Madisound sold the kit for $1200+ I believe (cam with precut cabinets)
I am willing to let it go for $699 plus shipping (UPS ground fully insured)








I have a 350 watt Plate amp also for home theater. its NEW/MINT condition( I never used it)
250w into 8ohms at .1%THD
380w into 4ohms at .1%THD
Signal to noise: 101DB (a-weighted)
Bass bosst EQ - 6DB @ 30hz
dimesnions: 12-3/8" W x 10-7/16" H x 4-3/4" D
weight - 12lbs
voltage - switchable 115/230v, 50-60hz, 750W
crossover control contin. variable 40hz-160hz at 12DB octave
phase 0-180degrees
line inputs (rca)
and Line outputs full range 20-20khz (can daisy chain to other amps)
Not sure how much its worth. so let do $150 OBO

