1. Sign-up to become a member, and most of the ads you see will disappear. It only takes 30 seconds to sign up, so join the discussion today!
    Dismiss Notice

Amplifer - static/crackling from 1 channel

Discussion in 'AV Receivers' started by jeff glowinski, Jun 5, 2003.

  1. jeff glowinski

    jeff glowinski Auditioning

    Joined:
    Dec 5, 2002
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    0
    I have a B&K av6000 amp connected to the pre-outs on my denon receiver. One of the channels is creating a static/crackling sound on one of the channels. I've even unhooked the pre-out/main in on the amp and the crackling sound still continues. If I switch to a different speaker output on the amp, the sound disappears. Any thoughts as to why this is happening?
     
  2. Yogi

    Yogi Screenwriter

    Joined:
    Jul 25, 2002
    Messages:
    1,741
    Likes Received:
    0
    Trophy Points:
    0
    There must be a loose contact on that particular speaker terminal or the output states of that terminal could be fried. Check the speaker output fuse. Also check if tha banana connector is loose or something. If you are out of warranty you could open the amp up and check the interior of the output stages. If you still have warranty call up B&K and they are pretty prompt to answer any questions you might have. They have on occasion even repaired amps out of warranty. so give them a try.
     

Share This Page