Adire Tempest Question

Discussion in 'Home Theater Projects' started by Frank Kanyak, Jul 15, 2005.

  1. Frank Kanyak

    Frank Kanyak Stunt Coordinator

    Joined:
    Feb 28, 2002
    Messages:
    240
    Likes Received:
    0
    Trophy Points:
    0
    After enjoying my DIY Sonosub in a dedicated room for over a year now I am now in a dilema. We are moving, and my new ht room cannot accomadate my large JBL S412's along with the sonosub. Does anyone know what measurements it would take to build a box sub and have it tuned to 16hz and if it is ported or not? I have the sonosub tuned to 16hz powered with the parts express 250 plate amp. Thank you...
     
  2. KeithMoechnig

    KeithMoechnig Stunt Coordinator

    Joined:
    Jun 25, 2005
    Messages:
    123
    Likes Received:
    0
    Trophy Points:
    0
    (I'll be using the specs from the new tempest, the one that isn't out yet, for this.) According to WinISD, the 12" tempest 4 ohm needs a 2.2 cubic foot box with a 4" diameter 57.68 inches, so you'll definately need to angle it. It will also make the box bigger since ports aren't included in box size.
     

Share This Page