X1 Projector Problem

Discussion in 'Displays' started by Fred Seger, Apr 6, 2003.

  1. Fred Seger

    Fred Seger Stunt Coordinator

    Joined:
    Aug 13, 2000
    Messages:
    136
    Likes Received:
    0
    After 300 flawless hours of use, my projector's picture has turned green and posterized. First it started with a few pixels "here and there" only affecting grays, now its the entire screen. It looks like you looking through a green lens and the picture. This is on every input. Svideo, Interlaced component, Progressive component, composite, SVGA and XGA at all refreshes. I also flashed the firmware to v3.8 - no dice. Tried DVD, Receiver, VCR, Computer. Double checked all cabling, tried isolating individual components. Tried powering via seperate breaker.

    Any thoughts on what's wrong.??
    I've emailed infocus customer support. And I will call them tomorrow, but I was just wondering if any body had a similar problem with a DLP projector. Maybe the solution is simple, like static electricity?

    Thanks
     
  2. Mathew Shelby

    Mathew Shelby Second Unit

    Joined:
    Dec 5, 2002
    Messages:
    344
    Likes Received:
    0
    Was the problem before or after going to v3.8?
     
  3. Fred Seger

    Fred Seger Stunt Coordinator

    Joined:
    Aug 13, 2000
    Messages:
    136
    Likes Received:
    0
    before
     

Share This Page