Yamaha receiver switching to DTS on analog input on its own

Discussion in 'AV Receivers' started by Mike_J_Potter, Dec 27, 2004.

  1. Mike_J_Potter

    Mike_J_Potter Second Unit

    Joined:
    Dec 26, 2003
    Messages:
    262
    Likes Received:
    0
    I am trying to solve a weird problem. I it a Yamaha HTR-5150 connected to a Mitsubishi WS-48413 tv using the audio out on the TV, the signal is being fed from a cable one of the coax inputs. Here is the weird part, if we flip through channels, on certain ones the receiver will flip into DTS and no sound will come out. We are using the IR command link would this have anything to do with it? The same channels work fine through the VCR using the other analog inputs. Any suggestions on how to resolve this, it has me baffled.
     
  2. Wayne A. Pflughaupt

    Joined:
    Aug 5, 1999
    Messages:
    6,098
    Likes Received:
    33
    Location:
    Katy, TX
    Real Name:
    Wayne
    If by that you mean a digital coaxial input, you can’t send the TV’s audio jacks to one of those.

    Regards,
    Wayne A. Pflughaupt
     
  3. Mike_J_Potter

    Mike_J_Potter Second Unit

    Joined:
    Dec 26, 2003
    Messages:
    262
    Likes Received:
    0


    No we are using the standard rca jacks (red and white RCA's) Thats what has me puzzled, since there are no reasons why the receiver should switch to DTS since it requires a digital connection, not the standard RCA connection.
     

Share This Page