Recent content by ScottLR

Hi - 2 years later...do you still have any cable left??

You are probably underpowering your speakers, which is about the worst thing you can do if you crank them. Too little power blows speakers, not too much. In other words, you're overtaxing the receiver/amp, which can blow your speakers. You can keep the sub on all the time.

Agreed - I have the Sony KDF-55WF655.

B&W and don't look back

I looked before I leapt - I didn't realize 3-chip designs were so expensive.

If you go DLP, get a 3-chip design.

www.resellerratings.com

That should be fine - the 99% is key. Don't use the regular, less-pure kind. Along with the heads, don't forget the capstan and pinch roller. Demagnetizing is important too. Just be sure to have your amplifier off or you'll blow your speakers. PS - I assume you are talking about an audio...

Try radio shack 15-1859. If it doesn't work for you, just return it.

Thanks for the link, Eric. I had seen it and, while it doesn't say HDCD and the machine doesn't have an HDCD insignia, one never knows. And yes, Feisal, I'm looking for decoding capability. I have a lot of HDCD. I'll probably end up with the 3910.

Thanks in advance.

For the $12, I buy it now.

Thanks, that looks like it should work. I'm wondering if Radio Shack has anything similar. And yes, the hum is coming from the incoming cable.

Hi all! Equipment: Sony KDF-55WF655 Scientific Atlanta Explorer 4200 HD box (cablevision) Adcom preamp/tuner (NOT HT, only 2 channel) Monster Cable HTS-3600 conditioner Commercial line conditioner/voltage regulator Problem: I still have only 2 channel stereo. I want to get the...

James...10 feet away is fine - no "eye adjustment" necessary.