Brendan, thats good to hear you are running a xls. what are your box dimensions and f3's I have yet to do any simulations. I am still doing preliminary research and getting peoples personal opinions (numbers do not mean everything to me ) thanks Rich
hey all I currrenly own a shiva mkIII and love the output of it when coupled to a 250w plate amp for HT I recently started doing my car stereo and tested the shiva with about 200w load @4 ohm. My first impressions were good but there just wasnt enough juice to provide the output that I...
sorry for the late reply -=-ive been on vacation !!! anyways I found my problem was that I was not getting enough line level singal out of my reciever!!!! I hooked up the low level inputs and WOW !!!! Is there a way that I can modify the plate amp to either boost the input (line level )...
Hey all, Im not sure if anyone has asked yet, but wheres a good place to get that truck bed liner Cheap ????????? In canada Preferably P.S AL the spires sound Great !!!!!!!!!!!!! -=- just considering the center now ~!!
the cube is only a test box!! I checked all my connections and they seem to fine. But my output is still very poor-=- I checked the following -=-parrallel connections -=-dissconnected all wiring and measure continuity between both coils -=- they were good -=-measured DCR with...
Hey all, I just got my mcm 250w plate amp and hooked up my mkiv shiva in a 12" sealed cube !!! My problem is that I have very poor sound output -=- (60 DB) if im lucky -=- this is with the xover up to max and the gain at max -=- I have my VC's paralleled to a 4ohm mono load My...
I just recieved my shiva from CCS and built a quick test box to listen to this puppy. I am using a 7.5 mH inductor in series with the positive terminal to give me a 6db passive crossover @ 85 hz. My problem is that I am hearing vocals out of the sub above this frequency range!!! Anyone...
Im interested in Creating a 2- way passive design utilizing a passive 12db/octave crossover with morel tweets and pearless mids. Is there anyone that Is good with crossover design willing to give me a hand???? thanks
Hi all, Im Trying to design a single driver full range speaker similar to CSS ELF1.5DK. I have Designed a Vented box using WinISD yeilding in a 6Litre box with a F3 of 69 Hz. My problem is I would like to Pad down the 5KHz to 15KHz to as flat as possible, but im not sure how to do this...
OK, Who sell raw drivers in canada other than Q-components, solen, creative sound, nuera ????????????? Im looking for a higher quality 6.5" 4 ohm Driver any ideas ??
hey all, Im interested in building a cable to convert a computer signal (db15) to a single composite video signal (RCA) If any one has doen this in the past or has any relivant information, please forward it on. Any help would be greatly apprieated!! thanks Rich R
im not sure about the aero-gel for the low end.. I personally dont think the areo is not going to go any lower than the Tb will. I would suggest something like a TB W8 or a av8 maybe. It all depends on how LOW and how much output you want. IMO -=-i would eliminate the areogel in your...