-

Jump to content



Photo
- - - - -

Sony HT-DDW5500 Amp Unit not working correctly


  • You cannot start a new topic
  • Please log in to reply
1 reply to this topic

#1 of 2 OFFLINE   MarkZA

MarkZA

    Auditioning

  • 1 posts
  • Join Date: Oct 31 2013
  • Real Name:Mark

Posted October 31 2013 - 01:40 AM

Hi

I noticed last night that my base and illumination was not working on my Home Theatre

The amp control unit whose illumination normally pulses with every bit of base was not functioning. I ensured that the illuminate button was switched on. The light itself does work as if I turn the system on and off the light illuminates for a brief second like it should do on startup

At the same time while there is some bass it is nowhere near as loud as it should be and the bass volume control on the amp does not appear to make any difference, softer or louder

Upon closer examination I noticed that the wires to one of the amps was disconnected and reconnected this but this did not fix my problems with the amp control unit

I double checked the wires and connections at the back of the receiver as well as the amp control unit. Whenever I would unplug and plug back in I would get a "PROTECT SUBWOOFER" message and the system would shut down

The User manual suggests when getting this message to ensure all wires are not damaged and correctly connected which I did but still the problem persists

I have contacted Sony Support and am awaiting a reply

Has anybody else experienced a similar problem

Thanks



#2 of 2 OFFLINE   schan1269

schan1269

    HTF Expert

  • 13,913 posts
  • Join Date: Jul 04 2012
  • Real Name:Sam
  • LocationChicago-ish/NW Indiana

Posted October 31 2013 - 09:20 AM

I don't know if we ever got that in the states.

 

Hopefully the .2 amp hasn't died.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users