Onkyo TX-SR600 no analog output (1 Viewer)

O know this is out of the HT realm, but I am stumped. I have been using my TX-SR600 in our livingroom HT set-up for some time with no issues. I wanted to add a I-pod and CD player for music. The problem is I can not get any sound from my analog sources. I used my OSD set-up to config per manual with no luck. I know that the defult setting for OPT 1, but I have the OPT1 set to my FIOS box. If I am using OPT1 for another purpose does it cancel out the CD input. I tried the Tape input with no better results. Any ideas would be helpful.

I know you said you used the OSD setup but most receivers default to the digital connection unless you change it to analog. Sometimes there's a button on the remote labeled "Signal Select" which allows you to switch from a digital input (such as optical or coax) to the analog one. You have to start with the simple stuff .

You can find great stuff on your local craigslist if you are knowledgable junior bridesmaid dresses about vinyl, but since you're new affordable bridesmaid dresses to vinyl you may want to go with something new or already setup for you cheap bridesmaids dresses . You can ruin your records with a bad setup wholesale bridesmaid dresses .