Onkyo TX-SR600 no analog output

Discussion in 'Playback Devices' started by vjkoval, Mar 10, 2011.

  1. vjkoval

    vjkoval Auditioning

    Joined:
    Apr 13, 2010
    Messages:
    9
    Likes Received:
    0
    O know this is out of the HT realm, but I am stumped. I have been using my TX-SR600 in our livingroom HT set-up for some time with no issues. I wanted to add a I-pod and CD player for music. The problem is I can not get any sound from my analog sources. I used my OSD set-up to config per manual with no luck. I know that the defult setting for OPT 1, but I have the OPT1 set to my FIOS box. If I am using OPT1 for another purpose does it cancel out the CD input. I tried the Tape input with no better results. Any ideas would be helpful.
     
  2. gene c

    gene c Producer

    Joined:
    Aug 5, 2003
    Messages:
    5,844
    Likes Received:
    48
    Location:
    Bay area, Ca
    Real Name:
    Gene
    I know you said you used the OSD setup but most receivers default to the digital connection unless you change it to analog. Sometimes there's a button on the remote labeled "Signal Select" which allows you to switch from a digital input (such as optical or coax) to the analog one. You have to start with the simple stuff .
     
  3. bridesmaid

    bridesmaid Auditioning

    Joined:
    Apr 27, 2011
    Messages:
    7
    Likes Received:
    0

Share This Page