1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

Panasonic l300u Factory/Service mode?

Discussion in 'Displays' started by Scot Kight, Mar 26, 2003.

  1. Scot Kight

    Scot Kight Member

    Joined:
    Nov 29, 1999
    Messages:
    16
    Likes Received:
    0
    If you know how to get into the factory or service modes for this projector, please let me know.

    I am not talking about the "flicker tweak" by holding down the enter key on the OSD setting. I need the real service mode with true access to the units bias and gain settings for ALL colors even when using the component input.

    Scot
     
  2. Anthony F.

    Anthony F. Well-Known Member

    Joined:
    Jun 12, 1999
    Messages:
    93
    Likes Received:
    0
    The service menu should be on the same screen as the flicker adjustment--right below it I believe.
     
  3. Scot Kight

    Scot Kight Member

    Joined:
    Nov 29, 1999
    Messages:
    16
    Likes Received:
    0
    No, that is not it unfortunately. That is a "service mode" which is just a series of system generated screens. Crosshatches, colors, etc.

    I need the TRUE service/factory mode which gets you into the bias and gains.

    Scot
     
  4. Anthony F.

    Anthony F. Well-Known Member

    Joined:
    Jun 12, 1999
    Messages:
    93
    Likes Received:
    0
    Sorry. I'd suggest going to AVS but I see you've been there too.[​IMG]
     
  5. Scot Kight

    Scot Kight Member

    Joined:
    Nov 29, 1999
    Messages:
    16
    Likes Received:
    0
    Heh yeah its been tough trying to get information about this projector. For some reason noone seems to have the service mode information, or the service manuals.
     

Share This Page