Is the Rav2000 preprogrammed for all Yamaha receivers?

Discussion in 'AV Receivers' started by Brian Beecher, Apr 2, 2003.

  1. Brian Beecher

    Joined:
    Mar 11, 2003
    Messages:
    25
    Likes Received:
    0
    Hello. Is there a place to find out if the Rav2000 is preprogrammed to operate a Yamaha RX-V793 receiver? Or maybe an MX-500? My original remote doesn't work, so I wouldn't be able to have another remote "learn" its functions. I also have a Sony 35" tv, CD player, VCR, and a Proscan DVD player. Would one of these remotes be a good choice for my setup? Thanks for the advice!

    Brian B
     
  2. Camp

    Camp Cinematographer

    Joined:
    Dec 3, 1999
    Messages:
    2,301
    Likes Received:
    0
    You could always go to a Yamaha dealer and "learn" from their remotes.

    I would suspect Yamaha's IR codes are pretty similar between their various receivers. Perhaps other Yamaha will be able to confirm this.
     
  3. David Susilo

    David Susilo Screenwriter

    Joined:
    May 8, 1999
    Messages:
    1,197
    Likes Received:
    0
    have you tried searching at Remote Central's website? Usually you can find remote definitions for Pronto Series (RAV2000 is a Pronto clone).

    WARNING: MAKE SURE THAT IF YOU'RE USING RAV2000-Z1 (the version that comes with RX-Z1), BACK EVERYTHING UP TO YOUR PC SINCE THE PROGRAM FOR RX-V1 MAY BE LOST FOREVER !!!!!
     

Share This Page