Search results

  1. Matt^K

    DVB318 on a Sanyo HT32744; lockup over DVI/HDMI

    Yeah, I made sure the components were unplugged. Thanks for the phone number, I completely glossed over that on Zenith's customer service site. Some guys over at AVS have said that this is a common problem with the HT32744, so it looks like a return and the Denon 1910 is my only option...
  2. Matt^K

    DVB318 on a Sanyo HT32744; lockup over DVI/HDMI

    Hi guys, I cannot get the DVI-output from the DVB318 to work on the HDMI input on my Sanyo HT32744 at all. My player has the March 2004 firmware and works over the components, but if I use a DVI-to-HDMI cable or the included DVI-cable with a Monster DVI-to-HDMI adapter, the darn thing...
  3. Matt^K

    Horrible Interference, need isolation/cabling suggestions

    Thanks for the suggestion, but I'm confused (again)... I'm a complete eletronics neophyte; a ground-lift is a little adapter that plugs into a power socket and disables the ground-prong, right? Well, neither the TV, the DVD player, nor the gamecube use 3-prong plugs to begin with... all the...
  4. Matt^K

    Horrible Interference, need isolation/cabling suggestions

    I don't understand Chu, I don't think I have any "coax" invloved in my system at all (unless that term also applies to the materials in the blue jeans / Ninteno component cables); I don't have cable tv hooked up to the set at all. All I have plugged in is the dvd player and the gamecube. I...
  5. Matt^K

    Horrible Interference, need isolation/cabling suggestions

    Thanks for the info Kurt, especially your past paragraph: That really had never occured to me, that the problem could lie within the analog inputs on the Sanyo. I tried hooking the same dvd player (Zenith DVB318) up to my roommate's Vega: there was some interference, but not the same kind...
  6. Matt^K

    Horrible Interference, need isolation/cabling suggestions

    I'm not using any form of surge protection; I have an old powerstrip that all my components are plugged into (the tv, the gamecube, and the dvd player), but I have ruled that out as the cause of interference. The GC is hooked up to the tv by the "official" Nintendo GC component cable. Judging...
  7. Matt^K

    Horrible Interference, need isolation/cabling suggestions

    Thanks for the reply, Unfortunately I do not know any of my neighboors all that well so I'm a bit uncomfortable just knocking on their front doors and asking them "hi, how's your reception?", but I will try that tomorrow. I live in a house that I'm sharing with a couple other guys; all of...
  8. Matt^K

    Horrible Interference, need isolation/cabling suggestions

    DISCLAIMER: I'm an electronics/hometheatre newbie, so I might be beating down the wrong path here. This is why I'm including so much info, so that if one of you HT Wizards notice something in my description that isn't consistent with normal RF interference, you'll speak up and save me from...
  9. Matt^K

    Cadence-Detection & Diagonal-Smoothing: HTPC vs. Dedicated DVD player

    Hey guys: I am in the process of putting together my first home theater system (a pretty modest one I'm afraid, but I only have a college student's budget to work with). I'm currently looking at the much-hyped Sanyo HT32744 (32" 4:3 HDTV) with an Onkyo S770 htib. I watch a lot of R1 anime...
Top