Search results

Ok, but I think the top position of the picture is ok? So, if I move the green gun up, I just use the red and blue with the user convergence? Or can I do them all from within the same area?

Hi all, I have the service manual for this TV, and am trying to gain access to the Deflection Jungle menu to adjust the vertical position(CNN banner and such are cut off at the bottom), The manual says to put the code in after pressing menu, and that works, and it goes to the Video Chroma...

http://www.dbstalk.com/index.php?

I have the RCA 8000 recorder, and am happy with it so far.

Yes, check here http://www.ramelectronics.net/html/c...OVMTC=standard

I'm enjoying my Mits 42313 so far. 1499 at sears, probably on sale as I type this.

I used the veneer from HD or Lowes (can't remember where I bought it). I got the red oak, plain back. I applied several coats of yellow glue to both the mdf and the back of the veneer, let it dry completely, then placed the veneer on the speaker, positioned it exactly where I wanted it, then...

go to parts express and look for part number 180-140 or 180-141

Whoops!:b

The only thing I know about them is what the Sears sales rep told me. He recommended that I stay away from them, and showed me the display that had been up for a month +. It had a significant number of pixels that were burnt out, showing up as black dots on the screen. Very visible with a light...

I have a DIY center that I built that weighs in at @ 40lbs. (It's an Audax design). I had to build a short shelf that goes across the entire top of my Mits 42313. it needed to be supported in the center to keep from bowing badly.

In the future, you can use a program called partition magic. It will allow you to manipulate partitions, add, delete, merge etc.

Thanks for the replies, my intent is to use Avia to "cal" the set, was hoping for some help in the interim. Gregg, I wasn't aware the 42313 had a removable glare screen. Thanks for your answers, anything helps.(well, almost);)

It's been released. Check the D* website.

Thanks, I haven't used Avia yet (need to buy it) but have adjusted the set somewhat, as I had indicated.

I can't believe no-one has help for me in this regard. Or is it you don't think a 42 inch RPTV is worth the effort.

If you get one of the available Dish Network HD receivers, you will not need an additional box to view HD channels. However, if you want to view off-air HD channels, you will need a HD tuner, either intergral to the satellite receiver, or TV top style.

Hi All; I'm new to this forum and new to the world of RPTV's. I just purchased a Mitsu 42313 and have adjusted the contrast down to 25, sharpness to 20, color to 40 and color temp to low(6500K). It seems good to me but I feel I could be missing something. Does anyone have any suggestions on...