1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

IR543 for sale

Discussion in 'Hardware Classifieds' started by captmike, Apr 1, 2014.

  1. captmike

    captmike New User

    Joined:
    Apr 1, 2014
    Messages:
    1
    Likes Received:
    0
    Real Name:
    bob
    I have 2 available in "like new" condition, both are black

    $75.00 each

    Will ship free within the USA via USPS First Class with Delivery Confirmation

    Will ship outside the USA via USPS First Class shipping for a small fee.


    This can be used in all of the following ways:

    1. Use to control X10 or other brands of household wiring lamp, light switch, appliance modules from this unit

    2. The best thing about the IR543 is that is converts Infrared (IR) signals into X10 power line language so that you can use your Harmony brand or equivalent IR remote control to control your light, appliance,lamp modules without having to touch the IR543 unit at all.

    Product Description Lets you use an infrared remote controller to transmit up to 16 X-10 IR commands to turn on lights and appliances connected to X-10 modules. It also includes buttons to control up to 8 X-10 products directly from the console, including "All Lights ON/All Units OFF" and intensity control of incandescent lighting.

    Overview If you own an X10 Universal remote, you will not need to use an IR543 Mini Controller to receive commands from the Remote - the Transceiver Module (PAT01) does this for you and has the added advantage of working through walls.

    If however you already own some other brand of Universal remote, it might have X10 IR codes in its library, or, if it's a learning remote, you can teach it X10's IR control codes. To control X10 modules with this remote you will need to purchase the IR543. The IR543 receives X10 IR codes and retransmits them over you existing house wiring to be received by X10 modules. This lets you control lights an appliances from your existing Universal Remote (providing it has X10 IR codes in its library).

    IR543 SET-UP AND OPERATING INSTRUCTIONS

    [*]Plug the IR543 Command Center into any convenient I 2OVAC outlet.
    [*]Set the Housecode dial to the same letter as your X-l0 or plug ‘n power modules.
    [*]Set the bank switch on the IR543 for the group of modules you want to control from the IR543's keyboard (1-4 or 5-8).
    [/list]
    To control lights and appliances from the IR543's keyboard:

    [*]To turn a module on or off, press and release the corresponding number button for the Unit Code set on the module, i.e. 1, 2, 3, or 4 (or 5, 6, 7, or 8). Then press the ON button or the OFF button on the IR543's keyboard.
    [*]To dim or brighten lights connecte4 to Lamp Modules and Wall Switch Modules, turn the module on as in step 1 above. Then press and hold the dim or bright button until the desired brightness level is reached.
    [*]Press All Lights On to turn on ALL lights connected to Lamp Modules and Wall Switch Modules which are set to the same Housecode as the IR543. Note: this affects ALL 16 Unit Codes (not just 1-4 or 5-8).
    [*]Press All Units Off to turn off ALL modules (including Appliance Modules) which are set to the same Housecode as the IR543. Note this affects ALL 16 Unit Codes (not just 1-4 or 5-8).
    [/list]
     

Share This Page