1. Guest,
    If you need help getting to know Xenforo, please see our guide here. If you have feedback or questions, please post those here.
    Dismiss Notice

HK AVR525 and Polk LSi9

Discussion in 'AV Receivers' started by Rodel, Apr 14, 2003.

  1. Rodel

    Rodel Auditioning

    Apr 10, 2003
    Likes Received:
    Does HK AVR525 receiver works well with Polk LSi9?

    Just bought AVR525 and planning to replace my Infinity RS3 with LSi9, but I'm concerned about the impedance matching with AVR525's 8ohms to LSi9's 4 ohms. Do they match well?

    Thanks a lot.
  2. DerrickW

    DerrickW Stunt Coordinator

    Jan 26, 2003
    Likes Received:
    I have listened to this combo and it works ok. Personally I'm getting the 15's instead of 9's, but that's a whole other discussion!

    Anyway, I must say that putting the 9 on a separate amp is helpful. The 525 is nice, but the LSi benefit greatly from a dedicated amp. They are also rather inefficient, and have a 4ohm load, so they arne't too easy to drive compared to cheaper 8ohm speakers. I am actually planning on using a 525 as my processor, but with a separate parasound amp to drive the LSis. I'm not trying to tell you NOT to get this setup, as I have been very impressed during my two auditions using exactly that- a HK525 driving a LSi15 and a LSi9. But the amp will just make it better if you can swing the money now or down the road.

Share This Page