Strange problem with my Sony vpl hw50es

Discussion in 'Displays' started by Walter Przybylowski, Oct 13, 2013.

  1. Walter Przybylowski

    Joined:
    May 11, 2006
    Messages:
    33
    Likes Received:
    0
    I've just recenetly mounted my projector on the ceiling and I have everything level and yet the bottom left hand corner of the projected image droops out of uniformity with the rest of the picture. I can't seem to find the right calibration button to correct this anomaly. If anyone has an idea what could be creating this distortion and how I might go about correcting it, I would be very greatful.
     
  2. Gregg Loewen

    Gregg Loewen Video Standards Instructor, THX Ltd.
    Insider

    Joined:
    Nov 9, 1999
    Messages:
    6,373
    Likes Received:
    32
    Location:
    New England
    Real Name:
    Gregg Loewen
    the projector needs to perpendicular to the screen and parallel to the ceiling.

    Also preferable that the L / R orientation is center of the screen.

    Then you use mechanical lense shift to center the projected image on the screen.

    If you still have the above problem after doing the above, some thing is either done incorrectly or the PJ's optical system is defective.
     

Share This Page