Icon Remote IR34A programing for receiver?

Discussion in 'Accessories, Cables, and Remotes' started by dave1987, Feb 28, 2013.

  1. dave1987

    dave1987 Auditioning

    Joined:
    Jan 18, 2012
    Messages:
    7
    Likes Received:
    0
    I'm trying to get my Icon Remote IR34A to work with my Yamaha R-v1103 A/V Receiver using the codes for Yamaha audio devices (the ones in the remote). I have been able to get two codes to "work" but neither of them will turn the unit ON. If I have it on already, most everything works fine, but if I power it off (which the remote WILL do), I cannot turn it back on using the remote, only the power button. I don't have an original remote for the unit and don't want to ebay for one unless absolutely necessary. I know that the remote will accept codes from another remote and I can program those codes to the corresponding buttons, so if I have to find the original remote, I suppose I could. Anyone else ever have this issue with powering your receiver on with the remote, and it not working?
     
  2. dave1987

    dave1987 Auditioning

    Joined:
    Jan 18, 2012
    Messages:
    7
    Likes Received:
    0
    Figured it out! Ordered a remote on ebay, cheap, and programmed the icon remote. The original remote has power on and standby, the same button is not used to turning the receiver on an off.
     

Share This Page