Search results

I have the eztubeshiva kit in a room 12X28 with 9ft ceiling (minus soffits and platforms). It's been driven by an old receiver (Pioneer VSX-607 stereo - one channel per coil) and currently by an old ROSS 400W mono (brigded) amp. I feel it blend very goo with my fronts (JBL L1's) and can give a...

When the painter sprayed the walls my moulding where already in place so my caulk is painted with a darkish green color under the off white color making it more opaque.

The duct tape might not be needed... I just have the bottom corner caulked for a more finished look and no light shines through. You will most likely want to caulk the bottom anyways for a finished look.

I have regular rope light in a crown moulding on the bottom edge of my tray ceilings in all my rooms in the basement. Works great with a dimmer for the HT, and as a night light in a bedroom. Without a dimmer it's a touch to bright in HT for my personal liking, but it doesn't really affect the...

I got mine in HD or Lowes.. don't remember which, but the longest ones they had where 20mm. My projector (Benq DX650) is mounted on a piece of 3/4" MDF so together with the space made by the rubber feet, I had to sink the screws pretty far into the MDF.

My existing sub is a POS KLH 10" that I'm acctually not using anymore beacause if sound like crap. Instead I drive my fronts as large.

I'm finishing off my budget home theater and looking to upgrade my old subwoofer. The room is about 11x27 with 8" height (floor level) I have a 2 tiered plattform for a total of 3 rows of seats. I have been eyeing the SVS25-31 but at 379 + SH, it a little more than I want to spend at this...

Correct me if I'm wrong, but isn't the 20Amp outlets referred to in this thread for "dedicated" 20 A circuits i.e. One single receptacle for the breaker where the single load can uses as much as 20A? Mikael O