Search results

From looking at the test reports linked below for the RM7500(12th chart on that page), it looks as though I should be setting my crossover frequency at 100 Hz. Is that correct, or is the 80 Hz fine? This might be for a different forum, but does does the crossover apply to your CD player as...

I understand now. After rereading the original post, I missed Paul's opening line of "These speakers are 4 ohms" and I didn't realize that the speakers were rated at 4 ohms. I just assumed most speakers are rated at 8 ohms! BTW Eric, I am from Ogden......IA originally ;)

Just curious, since I thought about adding a set of the Polks to my existing setup (http://www.hometheaterforum.com/htfo...hreadid=142576), doesn't the 3802 have enough power (105x5) to drive the Lsi speakers?

Ok, so you can get the signals through the antenna, and it is up to the box to locate and decode the local HDTV signals. Thanks everybody!

David, Thanks for the website. These HDTV broadcasts are run on a separate channel from the normal affiliate (cbs, cbs-hd)correct? How do I find these seperate Network HD channels?

David, Thanks for the website. These HDTV broadcasts are run on a separate channel from the normal affiliate (cbs, cbs-hd)correct? How do I find these seperate Network HD channels?

Ok, so it depends on whether your local network affiliate are able to broadcast in HDTV and if they did, the HD signal can be received via normal t.v. antenna or direct cable signal(nondigital)?

Do you need digital cable or satellite to receive HDTV broadcasts or?

you might want to also check your sound settings that you have set up for when the CD is playing. I had my Denon set at DTS Neo:6 for the CD audio output. There was a large difference in sound, (Bass wise and overall), if you have the receiver set at DTS Neo:6 - Music instead of DTS Neo:6 -...

So, to my understanding, you have to hook up the multi-channel analog connections to be able to listen to DVD-Audio and it then it comes down to listening preference regarding movie sound and which audio output (multi-channel vs digital) should be used? I was just looking at a Denon...

Just curious about the DVD-Audio Compatible players and how they are hooked up through my Denon 3802 receiver. It is my understanding that you need to connect the DVD player to the Receiver via both audio connections (digital for Movies and the 5.1 analog outputs for the DVD-Audio). Then you...

Thanks for the help. I used to have all those electrical formulas memorized back in the high school days, but being 8 years removed, they have been long forgotten. You don't get too much electrical engineering taught to you when you go to college for your CPA, unless you are like about half of...

Hi y'all Newbie to this board and have been researching the basics of setting up my HT since I made the substatial investment (according to my paycheck) in this receiver and the Polk RM7500 speaker set. I had some questions regarding the Denon 3802 receiver that I am guessing someone here can...

Sorry, meant to post it on the Receiver form. Newbie mistake. Chris P.

Hi y'all Newbie to this board and have been researching the basics of setting up my HT since I made the substatial investment (according to my paycheck) in this receiver and the Polk RM7500 speaker set. I had some questions regarding the Denon 3802 receiver that I am guessing someone here can...