Search results

I have a drop ceiling in my lower level and am getting buzzes and rattles during intense LF effect scenes. Am wondering whats the best way short of replacing ceiling;) to quiet these annoying noises down ? TIA Dave

I am looking for some outdoor speakers that sound good. Was wondering if anyone could suggest a pair? TIA;)

After years of lurking here I finally got a digital camera today so here are some pics of my theater. Let me know what you think. Thanks, Dave http://f2.pg.photos.yahoo.com/ph/dav...dir=/My+Photos Mits WT-46809 Mits SR HD5 Denon AVR 4802 Toshiba SD-5700 JVC XL-R5000 CDR Sony...

Hello, I've got a Mits WT-46809 with a Mits SR-HD5 Receiver. I have an OTA antenna going to the ANT in on the receiver and am using the SAT in as well, these are connected to the DTV input on back of Mits. Everything was working great. Now I have connected my analog cable feed to the ANT A...

After waiting a week after the release date to receive my copy of The Matrix Reloaded I have decided I need to find a new source. This is the third time now that DVDPlanet has dropped the ball. Three strikes and they are out in my book! Anyone have another srce they can recommend ? TIA...

I have been ordering DVD's from DVDPlanet for years and have ALWAYS had great service. My pre-orders always arrived on the release dates. Sadly this has not been the case for the last few months. Am I the only one not getting my pre-orders ? I have at least a dozen DVD's on pre-order with them...

I am a newbie to TiVo so forgive my ignorance;) I have the Toshiba SD-H400 DVD/TiVo player. I have got everything hooked up and am really enjoying the TiVo features (I have not tried the TiVo plus yet,still getting used to the basic). One thing I cannot figure out is when I go to TiVo Central...

Well I just returned from a trip to Circuit City (was supposed to pick up CD-R's ONLY)I happened to wander by the DVD Recorders and they had the Phillips as a open box special for $289.00 ! How could I refuse ? One question I have though is on the rear panel there are component in and component...

I have a Mits WT-46809 which I have calibrated the DVD Input using Avia. My question is how do I get the DTV Input calibrated ? Mits does not use a numerical value to show you your color/tint/brightness/contrast settings. So I've tried to set the slider's in the same position. I know this is not...

I am Looking for a HDD Recorder Only (no service agreement) I have found a website called DigitalRecorder.tv and was wondering if anyone has had any dealings with them good or bad ? Thanks in advance, Dave:)

I am considering a corner shaped flexy. Was wondering if anyone had any expierience with this? Anything I need to watch out for ? TIA, Dave

I've upgraded to DVD Profiler 2.1. Everytime I try to add a new DVD the Internet Data Base window opens and it starts to download the online profile list. Once it gets that done the program freezes and I have to shut it down. Any ideas ? I'm running Win98SE. Thanks in advance Dave

I found a code that allows me to have direct access to the different inputs on my Mits WT-46809 TV by only using one button on my remote. I learned the command to a button on my Aktis RC-8000 and it works great! One button access to the DVD input. I've tried putting the command in to the system...

I have been getting audio drop outs lately while watching movies and I need to figure which component is causing this. Any Ideas which is most likely to cause this ? I have a Denon 4802 and a Toshiba SD-5700 connected via a coax cable. Any help is greatly appreciated. Thanks

I was wondering if anyone had ever tried this. I have my Mits RPTV in a wall cabinet 40" off the floor and my center channel speaker on a stand right now.But was contemplating moving the sub to the center of the room and putting the center channel speaker on top. would balance out the room and I...

I've lost my local OTA HDTV feed. I have a Mits WT-46809 HDTV and a Mits SR-HD400 HDTV receiver. CBS is my local HDTV source for OTA. I have not been able to get them in for several days now. I have contacted Mits and after an hour on the phone and trying every trick in there bag of tricks...I...

I just upgraded to the Denon AVR-4802 and now I find myself with an Adcom GFA 545II amp and nothing to power it with. I was thinking of perhaps getting a passive Sub for the back chennels and pwer it with the Adcom. Cold this be done ? Any other thoughts on what to do with it ? Thanks for the...

I have my Mits WT-46809 sitting in cabinet that raises it 40" off the floor. I love the extra clearance as I have 3 kids...But I am not viewing the sweet spot....as I raise up out of my chair I can see that it is much brighter. Was considering tilting the back of the set. Anyone ever try that ...

I have a AVR-4802. Also have a SR-HD5,I'm running an optical cable from the audio out to the Denon on Opt2, for the DBS input. I am not getting any audio from this connection. I have also tried setting the TV in to opt2 with the same results...no sound. I also have run the two pair(white & red)...

Okay..here's a dumb question that I need help with. Am setting up my new receiver(Denon AVR-4802). I have the monitor out from receiver going to input 1 via S-Video cable. My DVD player is going to component input directly to TV. So when I have AVIA going I cannot bring up the on screen...

Okay..here's a dumb question that I need help with. Am setting up my new receiver(Denon AVR-4802). I have the monitor out from receiver going to input 1 via S-Video cable. My DVD player is going to component input directly to TV. So when I have AVIA going I cannot bring up the on screen...

I've calibrated my DVD inout using Avia and the picture is awesome. Was wondering how everyone is calibraing their DTV inputs to ge tthe same great picture. Thanks for the help, Dave Here's what I'm working with: Mitsubishi WT-46809 Mitsubishi SR-HD5 Hi-Def Receiver Denon AVR-4802...

Just got the Denon AVR-4802 and am wondering about the surround back speakers. Should they be the same as my Surrounds ? I have Polk F/X300i as my side surround set in the dipole mode. Thanks in advance for your help. Heres a list of what I'm working with: Denon Avr-4802 receiver Toshiba...

Just got my Mits HT-46809 last week end and am loving it....am still trying to get used to all the new set-up. I know that the movie vs. film setting has to do with 3:2 pull down...but am confused about what it actually is.....and what setting I should be using. Any help would be appreciated...

I just added the Polk cs400i to my system. Was reading the manual(for a change)and Polk recommends setting this speaker to the large setting. All my other Speakers are set to small. Was wondering if anyone has this speaker set to large and can it handle the power ? Thanks for your help. My...

I am currently receiving OTA local programming now. The VHF comes in very clear, and one UHF comes in very clear, FOX is a crap shoot...one day crystal clear...the next...looks like siberia during a white out. I am looking at getting a HDTV.....what kind of OTA reception can I expect ?