Separate names with a comma.
Discussion in 'Displays' started by JunoVazquez, Feb 26, 2004.
I'm about to purchase the screenplay 4800. Should I or should I not?
I'd either get an X1 for $1000 or wait for the new 4805 for the money you'll spend on the 4800.
SO the 4805 is different from the 4800. Would the 4800 have a faster wheel than the X1?
Nope...same machine save for some connectivity/jacks. The 4805 is a improvement in a few important ways: 16:9 aspect ratio 854x480 native resolution DMD (new chip - not a masked SVGA DMD) 4x color wheel (6 segment) Faroudja DCDi (FLI2310) 2000:1 contrast @ 6500K video optimized settings 750 lumens @ 6500K video optimized settings User controls for color gains and offsets, noise reduction, and chroma and luma sharpness DVI input with HDCP (M1-AD connector) 3xRCA component input - accepts both interlaced and progressive signals 12 volt screen trigger 200W SHP lamp - 3000 hours - two power levels TI DDP2000 controller chip Based on the X2 platform (also introduced at CES) Optical system is optimized for the 16:9 DMD Chassis is very similar to SP4800 - slightly deeper to help remove heat waves From this FAQ: http://members.shaw.ca/technut/sp4805/
Because the 4800 is the same exact machine as the X1. Except for a few minor differences (input jacks). The 4805 as a 6-segment (4x) wheel, it's 16:9 native, more lumens.