What are your PB12-Plus/2 settings?

Discussion in 'Speakers & Subwoofers' started by jephdood, Sep 2, 2005.

  1. jephdood

    jephdood Stunt Coordinator

    Joined:
    Feb 5, 2004
    Messages:
    113
    Likes Received:
    0
    Trophy Points:
    0
    So I just got my Plus/2 today as a releatively small step up from my ISD/2.

    Man, I've got the LFE level set to -10 on the receiver and the sub itself dialed in at only 8:00 or so. Anything above that and it gets too domineering.

    I will borrow a sound meeter from a bud in a couple days and do this right, but I'm curious how you all have yours set. I sometimes hear people talk about dialing theirs up to 11:00 and I just don't see how that's possible.

    Room is 16 or 17 ft. square, 8 ft. ceilings.

    Also curious how you have yours tuned and plugged. 16Hz, 20Hz, 25Hz? Bypass?
     
  2. rob-h

    rob-h Second Unit

    Joined:
    Jul 6, 2005
    Messages:
    263
    Likes Received:
    0
    Trophy Points:
    0
    Dont have one myself yet, but its the same as all subs. You calibrate it to the same level as your speakers to get the best performance. Each romm is going to be diffrent as to the level it takes to do this.
     

Share This Page