Vector Pro Plus Universal Projector Mount

Discussion in 'Hardware Classifieds' started by Ron Boster, Aug 17, 2004.

  1. Ron Boster

    Ron Boster Screenwriter

    Joined:
    Jan 10, 1999
    Messages:
    1,145
    Likes Received:
    0
    Peerless PJF 45 - Vector Pro Plus Universal Projector Mount

    The Vector Pro Plus Universal Mount is designed to surround and clamp the projector. The ball & socket design offers complete, integrated security from the projector to the ceiling and multi-directional positioning for proper lens alignment.

    Adjustment: One security screw adjusts yaw (360 degree), roll (+/-15 degree), & pitch (+/-15 degrees)

    It's silver in color. Width ranges from 10.75"-18.75"
    Height ranges from 5.5" to 10" It weights 9 lbs.

    I bought this two months ago as a temp solution until Chief came out with a mount for a newly released projector. I will sell for $100 + $10 shipping. I have all the associated directions and parts.

    Ron Boster
     
  2. HeatherM

    HeatherM Stunt Coordinator

    Joined:
    Jul 28, 2004
    Messages:
    89
    Likes Received:
    0
    sent email/pm
     
  3. Ron Boster

    Ron Boster Screenwriter

    Joined:
    Jan 10, 1999
    Messages:
    1,145
    Likes Received:
    0
    For those interested in whether the mount will work for their projector. The projector's height needs to be between 5 inches and 10 inches. The width of the projector needs to be between 10.75 inches and 18.75 inches. The length of the projector isn't as important.
     
  4. Ron Boster

    Ron Boster Screenwriter

    Joined:
    Jan 10, 1999
    Messages:
    1,145
    Likes Received:
    0
    To sweeten the pot, I'll throw in the matching extention column coupler that allows for cord management (cords run inside the extension column, through the hole in the coupler then out to the projector). The coupler connects the column and the mount. The cost was $35. It's free to you with the purchase of the mount, plus free shipping. So total cost for the mount and coupler from Peerless is $100 shipped to your door.

    Ron
     
  5. Ron Boster

    Ron Boster Screenwriter

    Joined:
    Jan 10, 1999
    Messages:
    1,145
    Likes Received:
    0
    $90 shipped. Paid $200 just a couple of months ago. My loss your gain
     
  6. todbnla

    todbnla Screenwriter

    Joined:
    Oct 17, 1999
    Messages:
    1,514
    Likes Received:
    0
    Location:
    39466
    Real Name:
    Todd
    So this is basically a box that the P/J sits in per say...? Appears to be multi fit in most cases

    This it?


    [​IMG]

    Free Bump!
     
  7. Ron Boster

    Ron Boster Screenwriter

    Joined:
    Jan 10, 1999
    Messages:
    1,145
    Likes Received:
    0
    Yes, Todd that is it. Thanks for the bump and pic
     

Share This Page