Ultra High-End SDI Silk-100 PCI board

Discussion in 'Archived Threads 2001-2004' started by Gianludovico, Jan 13, 2003.

  1. Gianludovico

    Gianludovico Auditioning

    Joined:
    Jan 11, 2003
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    as new: 350usd, only through Paypal [​IMG]
    Note: specifications subject to change
    1 SDI input with BNC male connector
    SDI formats supported: 525-line and 625-line standard definition, interlaced
    Note: SDI input is unavailable through VXD and WDM drivers; SDI input supported through DScaler
    1 s-video input
    4 composite inputs with RCA female connectors
    Analog formats supported: NTSC, PAL, and SECAM, up to 768 x 576 resolution
    I2C bus internal connection
    I2S bus internal connection
    Audio input internal connection
    Video output "monitor" internal connection
    PCI 2.1 bus
    Adjustments and settings available on SDI inputs
    * Brightness
    * Contrast
    * Color U
    * Color V
    * Full Luma Range
    * Color Bars
    * Vertical Filter
    * Horizontal Filter
    Recommended DScaler settings for 525-line SDI input
    Brightness: -2
    Contrast: 129
    Color U: 126
    Color V: 126
    Full Luma Range: Off
    Vertical Filter: Off
    Horizontal Filter: Off
    Recommended DScaler settings for 625-line SDI input
    To be determined
    Adjustments and settings available on analog inputs
    * Brightness
    * Contrast
    * Color U
    * Color V
    * Hue
    * Automatic Gain Control
    * Adaptive AGC (Crush)
    * Even Chroma AGC
    * Odd Chroma AGC
    * Even Luma Peaking
    * Odd Luma Peaking
    * Full Luma Range
    * Vertical Filter
    * Horizontal Filter
    * Even Luma Decimation
    * Odd Luma Decimation
    * Even Chroma Comb
    * Odd Chroma Comb
    * Color Bars
    * Gamma Corr Removal
    Recommended settings for analog inputs
    Settings vary by input source
    Requirements
    DScaler version 2.3 or higher video processor
    PC with at least 800 MHz CPU, for best performance
    Radeon or GeForce 2 or higher graphics card, for best performance
    Windows 98 SE, ME, 2000, or XP
    DirectX 8.0 or higher
    [​IMG]
     
  2. Gianludovico

    Gianludovico Auditioning

    Joined:
    Jan 11, 2003
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    no my SDI Silk 100 PCI input card is on Ebay starting 1$, no reserve [​IMG]
     

Share This Page