Speaker Wire

Discussion in 'Speakers' started by Nathan Bjork, Feb 28, 2004.

  1. Nathan Bjork

    Nathan Bjork Stunt Coordinator

    Joined:
    Feb 7, 2004
    Messages:
    147
    Likes Received:
    0
    I just got my JBL speaker package complete (S38II, S-CenterII, and N26II). So I went out and got some 14g speaker wire, and got everything put together and I started to wonder what my speakers were wired with internally. Is there only one way to find out by taking a woofer off? If it is a higher (smaller sized) gauge then should I replace the wires? The speakers have gold, five way binding posts.

    Thanks
     
  2. Robert_Dufresne

    Robert_Dufresne Stunt Coordinator

    Joined:
    Mar 30, 2002
    Messages:
    246
    Likes Received:
    0
    Nathan

    14g wire is fine even if it is bigger than what is inside your speakers it wont harm them,as a matter of fact bigger is better . don't TAKE THEM APART. You may do more harm than good.

    Robert
     
  3. Mike_Skeway

    Mike_Skeway Second Unit

    Joined:
    Jan 13, 2004
    Messages:
    265
    Likes Received:
    0
    14 AWG should work. No need to rewire your speakers internal wire, they are fine just the way they are.
     
  4. Nathan Bjork

    Nathan Bjork Stunt Coordinator

    Joined:
    Feb 7, 2004
    Messages:
    147
    Likes Received:
    0
    Ok thanks alot.
     
  5. Mike_Skeway

    Mike_Skeway Second Unit

    Joined:
    Jan 13, 2004
    Messages:
    265
    Likes Received:
    0
    You are welcome. Enjoy your new system. [​IMG]
     
  6. Jarvis_R

    Jarvis_R Agent

    Joined:
    Jul 7, 2003
    Messages:
    46
    Likes Received:
    0
    I picked up a pair of monster angle post connectors, how can I get the wire to stay in the connectors (monster speaker cable)?
     

Share This Page