Sony VPL VW10-HT

Discussion in 'Displays' started by Stephane, Jul 13, 2003.

  1. Stephane

    Stephane Stunt Coordinator

    Joined:
    Mar 21, 2002
    Messages:
    138
    Likes Received:
    0
    Trophy Points:
    0
    Ok I did a search, but nothing turned up, so I will ask this.

    I have just changed the bulb for my projector at home. I know that there are 2 buttons you have to press on the phisical unit to get it to rest to ( Zero ) hours for the bulb. For the life of me I do not remember which 2 buttons to press ...

    Can anyone out there help me so I can fire up my FP..

    Thanks
    Stephane
     
  2. Gregg Loewen

    Gregg Loewen Video Standards Instructor, THX Ltd.
    Insider

    Joined:
    Nov 9, 1999
    Messages:
    6,374
    Likes Received:
    32
    Trophy Points:
    6,610
    Location:
    New England
    Real Name:
    Gregg Loewen
    you have to enter the service mode, then hit the reset...there might be another way??
     
  3. EricN

    EricN Stunt Coordinator

    Joined:
    May 30, 2000
    Messages:
    71
    Likes Received:
    0
    Trophy Points:
    0
    Stephane, read your VW10HT manual. The 4 arrows on the control panel have to pushed in a certain order. I just had bulb 3 installed and the installer pointed out the sequence in the manual for me. I am not at home or I would post it for you. The sequence gets pushed then you turn the projector on. No service menu is required.
     
  4. Neil Joseph

    Neil Joseph Lead Actor

    Joined:
    Jan 16, 1998
    Messages:
    8,332
    Likes Received:
    1
    Trophy Points:
    0
    Real Name:
    Neil Joseph
    I have the 11HT and I am also not at home. I will chime in later. Do let us know if you immediately noticed an improvement in PQ once you changed the bulb. Just curious.
     

Share This Page