Sony Help

Discussion in 'Archived Threads 2001-2004' started by Matt Crouthers, Apr 25, 2002.

  1. Matt Crouthers

    Matt Crouthers Auditioning

    Joined:
    Apr 24, 2002
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    I have a Sony reviever. My set up is as follows. Satelite to VCR via A/V cables. VCR to Reciever via A/V cables. and reciever to TV via A/V cables. I am not getting a picture but am getting sound. I have the Monitor Jack plugged in as well. There is one on my TV as well. I have hooked it up but still no pic. Please help.
     
  2. Eduardo

    Eduardo Agent

    Joined:
    Apr 10, 2002
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    I would test each video source directly to the television using the same AV cable. If everything is ok then hook up a video source and test each cable. If everything works then you may have a problem with the receiver.

    Hope this helps.
     
  3. John Garcia

    John Garcia Executive Producer

    Joined:
    Jun 24, 1999
    Messages:
    11,571
    Likes Received:
    25
    Trophy Points:
    0
    Location:
    NorCal
    Real Name:
    John
    If you are only sending one signal to the receiver, then to the TV, yor are doing nothing but adding an additional connection.

    First, follow Eduardo's advice to find out if all your sources are sending video signal first.
     

Share This Page