Sony Conversion trouble (1 Viewer)

[Bill Millar]

I have a Sony 53" model KP-53S25 it has a beautiful picture but everytime I turn the power off to the TV set the convergence setting goes bad and I have to reset it everytime I turn it on.
Theres power to the TV because the clock stays the right time. Anybody else ever had this problem.
Thank you for any input.
Bill

 

[RyanDinan]

Bill,
I'm assuming that this is a rear projection set?
If so, mis-convergence on startup is perfectly normal.
Give it ~30 minutes to warm up before making any changes or adjustments to the convergence.
If the convergence is still messed up after you let it warm up and calibrate it, then you may have a bad convergence board, and you'll have to call Sony to get it replaced...
Hope this helps!
-Ryan Dinan
------------------