I'm sure this is a user error type of issue, but I've tried everything I can think of and it's still not working. I can't get my Sony BDP-S5100 BluRay 3D DVD player to work through my Onkyo TX-NR626 receiver. I have it plugged in to the BD/DVD HDMI port, but on the TV side (Visio M-Series) the picture flashes but is mostly just black. It doesn't stay visible long enough to even access the DVD set up menu. The audio cuts in and out but is mostly out. I used the 10 second "stop button" method to reset the DVD player to the lowest output resolution. This helped a little, but it still wasn't working. I plugged it in to all the other HDMI ports on the receiver and none of them worked either. I have an Xfinity X1 cable box connected through the cable HDMI port of the receiver and it's working great and is broadcasting in 1080P. No problems with the cable at all. It's just the DVD player. I've hooked the DVD player up directly to my TV and it works great. I used the same HDMI cable for this, so it's not the cable itself. It has to be a tuner setting of some sort. Can someone help me with the receiver setting that I need to make this DVD player work? Thanks in advance.