Sharpness control on Panasonic PT AE100

Discussion in 'Archived Threads 2001-2004' started by Mark-C, Mar 15, 2003.

  1. Mark-C

    Mark-C Stunt Coordinator

    Joined:
    Oct 6, 2000
    Messages:
    140
    Likes Received:
    0
    Trophy Points:
    0
    I'm running a Denon 2800 MK2 through a Panasonic PT AE100 Projector with a 525p Progressive signal, all the picture controls are tweakable up and down except sharpness, it starts at "0" and won't go any lower, is there anyway round this ?
    My player has the sharpness turned right down but I still have double outlines around objects.
     
  2. Andrew_Ballew

    Andrew_Ballew Second Unit

    Joined:
    Feb 21, 2002
    Messages:
    294
    Likes Received:
    0
    Trophy Points:
    0
    Are you sure that you are not just seeing edge-enhancement inherent in the source? If not, try and minimize the outlining as much as possible with your sharpness controls (use a sharpness test pattern) and be happy.

    Cheers

    Andrew B.
     
  3. Mark-C

    Mark-C Stunt Coordinator

    Joined:
    Oct 6, 2000
    Messages:
    140
    Likes Received:
    0
    Trophy Points:
    0
    Even using the Avia test pattern I can't get it right with player and Projector set as low as possible.
    The only film that it isn't obvious on is Ep 2 AOTC
     

Share This Page